SC-Power - Some interesting figures!
Discussion
In case any of you were thinking about one of these conversions, I thought I'd share some figures that were kindly given to me by P'header, RichardD (I hope you don't mind me posting these Richard, let me know if you do!). Using a copy of my dyno plot, drag coefficients from the Race Technology software I use in the Tuscan series, tyre profiles, frontal area and lots of other numbers, Richard was able to obtain the following numbers from some amazing software that he has. I'm told that its very accurate so these numbers should be obtainable in real life. I'd love to test some of them in the summer methinks!
Anyway, the car is a 450 Chim running the full fat SC-Power supercharger kit with a few other bits (listed on my profile if you're interested), and is running just over 400 bhp at the flywheel. The first image is using sticky tyres (think Toyo R888's up to temp) and a standard 3.45 diff, the second is the same but with a 3.08 diff to compare top speed/acceleration and the third is a virtual drag race against some cars that Richard had figures for with my Chim running road tyres (less grip, hence the slower 0-60 due to wheel slip). The Cayman S is in there because my father owns one and despite being scared of driving the Chim, he still maintains that his Pork is faster than the Chim. Before showing him what's what on the track this year, I thought it would be fun to show him some figures!
Anyway, I'm really impressed with these numbers. The Charger kit may not be cheap, but the numbers speak for themselves. Thanks again Colin & Dave! Details of the kit can be found at www.SC-Power.co.uk (I'm not under commission by the way!) - just a very happy customer
Click for full size if they're hard to read!
3.45 Diff (Sticky Tyres)

3.08 Diff (Sticky Tyres)

Virtual Drag Race (Road Tyres)

The Ferrari gains a lot from the fact that it has a sequential gearbox, the Chim loses quite a lot of time due to changes and wheelspin!
Anyway, the car is a 450 Chim running the full fat SC-Power supercharger kit with a few other bits (listed on my profile if you're interested), and is running just over 400 bhp at the flywheel. The first image is using sticky tyres (think Toyo R888's up to temp) and a standard 3.45 diff, the second is the same but with a 3.08 diff to compare top speed/acceleration and the third is a virtual drag race against some cars that Richard had figures for with my Chim running road tyres (less grip, hence the slower 0-60 due to wheel slip). The Cayman S is in there because my father owns one and despite being scared of driving the Chim, he still maintains that his Pork is faster than the Chim. Before showing him what's what on the track this year, I thought it would be fun to show him some figures!
Anyway, I'm really impressed with these numbers. The Charger kit may not be cheap, but the numbers speak for themselves. Thanks again Colin & Dave! Details of the kit can be found at www.SC-Power.co.uk (I'm not under commission by the way!) - just a very happy customer

Click for full size if they're hard to read!
3.45 Diff (Sticky Tyres)

3.08 Diff (Sticky Tyres)

Virtual Drag Race (Road Tyres)

The Ferrari gains a lot from the fact that it has a sequential gearbox, the Chim loses quite a lot of time due to changes and wheelspin!
Edited by 450Nick on Friday 6th February 21:29
I'm not sure actually, it would certainly be possible to go from 80-120 in 4th, but with 3rd gear maxing out at 99, would it be any quicker to use 3rd and 4th?
Richard!?
Edit: I'm still not convinced by your traction control idea Nigel... I rather like the ability to light the rears up with a flick of the toe! Your monster however....! I'd love to see a comparison of either your or Colin's cars against my lowely 450 when they're finished, if mine can do this then what on earth will yours be capable of?!
Richard!?Edit: I'm still not convinced by your traction control idea Nigel... I rather like the ability to light the rears up with a flick of the toe! Your monster however....! I'd love to see a comparison of either your or Colin's cars against my lowely 450 when they're finished, if mine can do this then what on earth will yours be capable of?!
Edited by 450Nick on Friday 6th February 22:52
well hopefully ill find out, however things are on a go slow as I have moved house, first job was to sort the garage, when I find out how to attach a picture Ill post it. Still waiting for the heads from Wildcat and then deciding who to award the engine build to. Did you have the larger charger or the standard one ???, I went with the racelogic system as you can do lots of adjustment, Emerald are too far away from getting the software ready for the built in traction control. Bet you cannot stop smiling with the power delivery, who needs a speed six................ pop
450Nick said:
I'm not sure actually, it would certainly be possible to go from 80-120 in 4th, but with 3rd gear maxing out at 99, would it be any quicker to use 3rd and 4th?
Richard!?
I'm not sure whether it would be any quicker, but in-gear acceleration times through the top third of the power band are quite a good way to gauge engine performance without the time/expense of a dyno session. I tend to use 4th because the lower gears are over too quickly to measure (and can be a bit marginal on traction), and in 5th the speeds are too high.
Richard!?Those figures are quite believable with a genuine 400 bhp.
My 450 is quite standard but i use nitrous and with only 60 bhp jets achieved the times below at York last year...
Results for August 3rd 2008: UK Northern Nationals
Individual racer results for: Y373 derek beck
Run Time Catagory Dialin Reaction 60 Foot 1/8 ET 1/8 MPH 1/4 ET 1/4 MPH
10:02:38 RWYB - CAR 0.00 0.9800 2.0170 8.2909 87.5600 12.7100 111.9600
10:08:59 RWYB - CAR 0.00 0.8648 1.9582 8.1132 88.9100 12.4893 113.3100
10:57:57 RWYB - CAR 0.00 1.0741 1.9738 8.1227 88.9500 12.5078 113.1400
11:03:00 RWYB - CAR 0.00 0.8798 1.9942 8.0982 90.1800 12.4492 113.9500
12:17:19 RWYB - CAR 0.00 0.8219 1.9150 8.0769 87.9200 12.4980 111.6800
12:27:43 RWYB - CAR 0.00 0.8339 1.8501 7.8749 86.7500 12.2251 113.3300
I have recorded a 0-60 of 4.00 at York on another date.
0-100 equates to just over 9 seconds.
I also use R888's which make a big difference.
Im hoping to see at least 1 SC car turn up at York for a dedicated TVR clas in 'Run what Ya Brung' on 12th April so hopefully see if the times quoted can be verified.
This year i will have 275 Mickey Thompsons Street E/T's and at least 125 bhp of nitrous and am hoping for a 1/4 of 11.8
My 450 is quite standard but i use nitrous and with only 60 bhp jets achieved the times below at York last year...
Results for August 3rd 2008: UK Northern Nationals
Individual racer results for: Y373 derek beck
Run Time Catagory Dialin Reaction 60 Foot 1/8 ET 1/8 MPH 1/4 ET 1/4 MPH
10:02:38 RWYB - CAR 0.00 0.9800 2.0170 8.2909 87.5600 12.7100 111.9600
10:08:59 RWYB - CAR 0.00 0.8648 1.9582 8.1132 88.9100 12.4893 113.3100
10:57:57 RWYB - CAR 0.00 1.0741 1.9738 8.1227 88.9500 12.5078 113.1400
11:03:00 RWYB - CAR 0.00 0.8798 1.9942 8.0982 90.1800 12.4492 113.9500
12:17:19 RWYB - CAR 0.00 0.8219 1.9150 8.0769 87.9200 12.4980 111.6800
12:27:43 RWYB - CAR 0.00 0.8339 1.8501 7.8749 86.7500 12.2251 113.3300
I have recorded a 0-60 of 4.00 at York on another date.
0-100 equates to just over 9 seconds.
I also use R888's which make a big difference.
Im hoping to see at least 1 SC car turn up at York for a dedicated TVR clas in 'Run what Ya Brung' on 12th April so hopefully see if the times quoted can be verified.
This year i will have 275 Mickey Thompsons Street E/T's and at least 125 bhp of nitrous and am hoping for a 1/4 of 11.8
just out of interest... what does it cost to strap a supercharger to a 400?...
if a good chimera 4.0 comes in at anything from £6-10k and an equivalent chimera 5.0 or griffith at only a few grand more, is there any merit in going this route, or would you generally be better selling the chim and buying a 5.0 chim/griff?
sorry if that all sounds a bit naive
if a good chimera 4.0 comes in at anything from £6-10k and an equivalent chimera 5.0 or griffith at only a few grand more, is there any merit in going this route, or would you generally be better selling the chim and buying a 5.0 chim/griff?
sorry if that all sounds a bit naive
village idiot said:
just out of interest... what does it cost to strap a supercharger to a 400?...
if a good chimera 4.0 comes in at anything from £6-10k and an equivalent chimera 5.0 or griffith at only a few grand more, is there any merit in going this route, or would you generally be better selling the chim and buying a 5.0 chim/griff?
sorry if that all sounds a bit naive
Prices can be found on the website at this address: http://www.sc-power.co.uk/SC%20Power%20Supercharge...if a good chimera 4.0 comes in at anything from £6-10k and an equivalent chimera 5.0 or griffith at only a few grand more, is there any merit in going this route, or would you generally be better selling the chim and buying a 5.0 chim/griff?
sorry if that all sounds a bit naive
I think its worth thinking about for a 4 litre. I mean you can take a 4 litre to the level of a well tuned 5 litre using one of these kits, so if thats what you're looking for then its definitely something to consider. The kits have proven to be very reliable and my own kit hasn't missed a beat so far come rain or shine (or snow!). Another good reason is that you can get the extra power without changing cars. Many have spent a long time choosing their cars and getting them looking / set up to their taste. Changing cars introduces a whole host of new variables whereas this system lets you keep your car, but have lots more fun in it

You'll get conflicting advice I suspect, especially if you ask the people who sell the conversions, but my view is that you should start with a cross bolted engine with decent pistons before you start looking at forced induction. So I'd go for somewhere between 4.6 and 5.0 first. As well as giving you a very good torque increase even without forced induction, it means that you will get greater gains when you do go for forced induction. Alternatively, you will need less boost to produce a given output which means you will be further back from the danger of catastrophic engine failure.
You may be able to get the same power from a s/c 4.0 as a n/a 5.0, and it may even work out cheaper (although I doubt it), but I'd regard the 5.0 as the safer bet.
It may seem hypocritical of me to advise against forced induction, but what I'm trying to say is that this there are lots of other things you should be considering before you resort to forced induction.
You may be able to get the same power from a s/c 4.0 as a n/a 5.0, and it may even work out cheaper (although I doubt it), but I'd regard the 5.0 as the safer bet.
It may seem hypocritical of me to advise against forced induction, but what I'm trying to say is that this there are lots of other things you should be considering before you resort to forced induction.
hiltonig said:
That Daddy said:
hiltonig said:
Wheelspin !!!!, time for traction control, you know it makes sense !!
Traction control is what your right foots for 
Edited by hiltonig on Saturday 7th February 18:37
got me with that one,by the way those are some awesome figures 450 Nick,just wish my piggy bank was filled with monies rather than shirt buttons at the moment 
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



