Condensation on power steering pipes
Condensation on power steering pipes
Author
Discussion

STE VR

Original Poster:

501 posts

237 months

Saturday 7th February 2009
quotequote all
Having lost my job at christmas my baby has been under cover for about 2-3 weeks. Having not eaten/drank/lived i have managed to scrounge enough money to tax it again and put some loopy juice in.(my priorities are correct) wink I was giving her the usual under bonnet inspection before taking her out and noticed alot of condensation all over the power steering pipes. Is this normal? I have had no probs with the steering fluid level etc and no leaks SINCE I CHANGED THE PIPES about 4 months ago. I just used thick walled coolent pipe as it was 'free' from work. I don't know the correct spec of what piping it is. Any help would be greatly appreciated.

Ta

Steve

MADMAX2

2,336 posts

225 months

Saturday 7th February 2009
quotequote all
Its prob because of the cold give the pipes a wipe dry and keep your eye on it


must get your priorities right!



ian

GreenV8S

31,027 posts

315 months

Saturday 7th February 2009
quotequote all
I assume you're talking about hoses. What fluid is it on the outside? If it's pure clean water (maybe with a bit of muck off the dirty hose) then it probably is just condensation. But if you haven't used high pressure hydraulic hose there's a risk imo that the hoses are starting to leak. If they do fail then sudden loss of steering could ruin your day and an underbonnet fire when the oil hits the exhaust manifold could add insult to injury. So maybe just water but don't assume that.

STE VR

Original Poster:

501 posts

237 months

Saturday 7th February 2009
quotequote all
Thanks for the replys, must admit on further inspection it does look a touch like fluid. Will check tomorrow.It's mainly on the pipe from the reservoir to the rack, I thought this was the low pressure side?

Thanks

Steve