passenger door pops open
passenger door pops open
Author
Discussion

cornish pasty

Original Poster:

135 posts

219 months

Sunday 8th February 2009
quotequote all
Hi Guys having problem with passenger door coming open when driving, normaly only breaking the seal on door and lock still holding, but has even opend right up,(starting to run out of passengers on tight bends) have dissconected cable from center console, dissconected door button ,and unpluged solienoid, removed complete door lock and washed down with petrol and refitted, drive over any rough road and lock still pops open. Any ideas if not where can you buy new lock. Cheers Mateys C/P

SteveW8975

6,389 posts

215 months

Sunday 8th February 2009
quotequote all
I've got the same problem on mine, but it's only the catch on the door itself that has moved out of position slightly, meaning the mechanism in the door from doesn't hold it securely.

Maybe a few minutes with an allen key and some swearing may be a cheaper first fix?

bobfather

11,197 posts

286 months

Sunday 8th February 2009
quotequote all
This happened to me a couple of years ago. I found that the latch solenoid was no longer fully retracting so the latch was only just engaging. New solenoid from Maplins and all was well

Barreti

6,689 posts

268 months

Sunday 8th February 2009
quotequote all
Happened to my griff a couple of months ago. It was the catch not engaging properly. It was full of crud for one thing but the problem with it was the plastic coating on the bit of the catch that moves had split and and was stopping the catch clicking completely shut. Cutting the plastic away resolved my problem.

If you find a replacement lock will you post it up here. I'm in no rush but its going to get on my nerves that the lock isn't perfect.

dumbfunk

1,727 posts

315 months

Sunday 8th February 2009
quotequote all
You first need to determine whether the latch is actually fully closing or not. It will move to a first safety position and then another 5mm or so to the full latched position. If this is the problem then a striker adjustment may fix it.

If not then for some reason the pawl and claw are not fully engaging inside the mechanism. - This will be because either the inside or outside release lever is jammed (but you've disconnected the cables right?) or because the profile on the pawl is worn away. Don't bother trying to fix it as automotive latches are designed as disposable items due to their safety critical nature. Look for a replacement - I *think* that it's a Vauxhall product?


dumbfunk

dumbfunk

1,727 posts

315 months

Sunday 8th February 2009
quotequote all
Barreti said:
... the plastic coating on the bit of the catch that moves had split and and was stopping the catch clicking completely shut. Cutting the plastic away resolved my problem.
The purpose of this part is to minimise metallic slam noise and so long as bits of it aren't still jammed somewhere it *should* be ok but you're wise to look for a replacement!

Red V8

873 posts

258 months

Monday 9th February 2009
quotequote all
Check the centre knob before buying new parts... mine did this a few years ago and it was the centre knob sticking...

cornish pasty

Original Poster:

135 posts

219 months

Saturday 14th February 2009
quotequote all
Hi guys finaly fixed door lock thanks for the ideas, I had tried most of the.Te way I fixed it was to put a small tension spring from the door release catch,(the lever that the central control knob cable attaches to) there is already a hole in this lever just behind where the cable enters it, and is fixed with a screw and feral ( just like bike brake cable ) then I attached other end of spring to lock retaining plate,just above the lever is another little hole already there. the spring holds this lever in tension in the locked position. after months of fannying around with different things the lock now works fine. I cant help but think that when this lock was desined the two holes were ment to hold a spring to do just this, I hope this helps anyone with similar problem,if you cant understand from this I will take some pictures, Cheers Mateys C/P

dumbfunk

1,727 posts

315 months

Saturday 14th February 2009
quotequote all
In the donor vehicle both Inside and Outside release handles would be fitted with springs to supplement the release lever spring in the latch.