wiper problems
Discussion
They run off the same fuse. Check that all the connections onto the motor are OK. If they are, check that there is powere on each connection with the appropriate wiper speed selected. All you need to do this is a circuit tester. If you have power to the right wiper motor terminals on both 'slow' and 'fast' settings, then check the wiper earth. If that's OK, then it's s problem inside the motor. If there is no power tom the 'fast' terminal, trace back to find the break in the circuit.AS with all electrical problems, do the testing in sequence until you find the fault.
I hope this helps.
Peter
I hope this helps.
Peter
Gassing Station | Classic Minis | Top of Page | What's New | My Stuff


