Moving the battery
Discussion
I'm thinking about moving the battery. Maybe to the boot, possibly behind the passenger seat(will it fit?)
I have done a search and found that Spyschim has done it already. Spyschim can you let me know how it went? possibly some pictures/advice.
Also if anyone else out there has done it would be gratefull for any advice.
This is prompted by the ammount of water that caused a small but annoying electrical problem.
Cheers
Kwacker
(edited to spell my name right)
I have done a search and found that Spyschim has done it already. Spyschim can you let me know how it went? possibly some pictures/advice.
Also if anyone else out there has done it would be gratefull for any advice.
This is prompted by the ammount of water that caused a small but annoying electrical problem.
Cheers
Kwacker
(edited to spell my name right)
Edited by Kwacker on Sunday 15th February 09:48
i found it easy to move battery to boot there is not enough room behind seat . first i pulled out the loom including fuses and found that with a bit of untangling the fuses reached to behind the seat and battery cable reached to the boot just.
behind passenger seat there is a chassis bolt which i removed used a longer bolt and connected earth leads to my battery /amps/fuse etc (as well as original earthing) i removed centre consoll and ran all cables underneath replacing main earthing point ,which was loose ,on the way it is just to the left of window switches under consoll.
the battery i put on a raised platform then used original battery box trimmed and turned upside down to cover battery.
i will post some pics as soon as i can find my camera lead !
behind passenger seat there is a chassis bolt which i removed used a longer bolt and connected earth leads to my battery /amps/fuse etc (as well as original earthing) i removed centre consoll and ran all cables underneath replacing main earthing point ,which was loose ,on the way it is just to the left of window switches under consoll.
the battery i put on a raised platform then used original battery box trimmed and turned upside down to cover battery.
i will post some pics as soon as i can find my camera lead !
Kwacker said:
This is prompted by the amount of water that caused a small but annoying electrical problem.
Sounds more like justification to move the fusebox or fix the water ingress?spyschim said:
behind passenger seat there is a chassis bolt which i removed used a longer bolt and connected earth leads to my battery
I think I would want the main earth bolted to the backbone of the chassis, not the outriggers. When you look at the chassis and how it is protected from the elements, the TVR position is actually the best available bolt hole for least corrosion of the connection IMHO.spyschim said:
behind passenger seat there is a chassis bolt which i removed used a longer bolt and connected earth leads to my battery
I think I would want the main earth bolted to the backbone of the chassis, not the outriggers. When you look at the chassis and how it is protected from the elements, the TVR position is actually the best available bolt hole for least corrosion of the connection IMHO.Edited by spyschim on Tuesday 17th February 20:19
Kwacker, I remember posting the same question about six months ago and good ol spychim came to the rescue with detail and pictures.....good looking job!
I still intend doing this, even more so now I have had a roll bar fitted, passenger leg room is now very poor.
I note you are Berkshire boy, I'm near Newbury. If I start my mod soon I'll let you know.
Roy.
I still intend doing this, even more so now I have had a roll bar fitted, passenger leg room is now very poor.
I note you are Berkshire boy, I'm near Newbury. If I start my mod soon I'll let you know.
Roy.
Edited by roysum on Thursday 19th February 19:33
Would just moving he battery to the boot leaving the fuses and loom in the footwell create much more space ? This would give the benefit of making the battery a lot more accessible for charging or a jump start and give much easier access and visibility to the fuse board. I'm guessing you would gain a good six inches of leg room on the passenger side.
over_the_hill said:
Would just moving he battery to the boot leaving the fuses and loom in the footwell create much more space ?
It sould do as the relays and the ECU could be mounted to the top of the footwell, or one side. Thinking out loud, you could probably get ECU into the lower dash below the stereo !?One small point to moving the battery is that you will have to re-trim the footwell as the carpet will not (may not) go all the way to the back.
Cheers,
Matt
spend said:
Dont forget you still need to rake the foot 'board'? backwards so it will wedge in and be at the right angle for feet. I would have thought moving the fusebox to the early floor position would gain most room if the battery is moved?
On the early one the fuseboard was still on the "back wall" just lower down and the battery located above it. Re the foot board I would have thought that it would need making a bit smaller but could be upright at the back up against the relays just about 4"-5" further backwards (I reckon without moving the fuse/relay board itself there won't be much more saving than that..!?)Matt.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


