otter switch
otter switch
Author
Discussion

bjarkes

Original Poster:

122 posts

215 months

Sunday 15th February 2009
quotequote all
Got a 1994 chim, with an expansion tank fitted. There is no otter switch in the swirl tank, where can I find it?
Is it the one in the picture, in the thermostat housing?

Dave 500

7,889 posts

273 months

Sunday 15th February 2009
quotequote all
bjarkes said:
Got a 1994 chim, with an expansion tank fitted. There is no otter switch in the swirl tank, where can I find it?
Is it the one in the picture, in the thermostat housing?
If it's not on the swirl tank I think it might be on the left side of the rad.

Barkychoc

7,848 posts

235 months

Sunday 15th February 2009
quotequote all
That is it that you have identified - I bought a thermostat elbow with the otter switch thread in it - it is listed as a thermostat housing for a Range Rover with aircon if anyone is interested - I got it from Rimmer brothers.

It allowed me to replace my corroded steel coolant pipes at the front on my V8S without having to worry about getting the otter switch union in the pipe - I extended the wires to the thermostat housing and put it there instead, a better place IMHO straight off the top of the engine.

Edited by Barkychoc on Sunday 15th February 13:34

spend

12,581 posts

282 months

Sunday 15th February 2009
quotequote all
It's an AC car, I think the rad / condensor controls are linked via the ecu. They will certainly be different to what most folks expect being a LHD preserp + AC & PAS - just about as odd ball a Chim ever made (wiring wise) I would suspect.

bjarkes

Original Poster:

122 posts

215 months

Sunday 15th February 2009
quotequote all
I thought that was it, thanks, but is the switch the same type as the one in the tank, or i´am I looking at a speciel switch when ordering?

PS: Its a RHD! and yes with aircon and PAS.

spend

12,581 posts

282 months

Sunday 15th February 2009
quotequote all
Its similar, but may have slightly different temp range?

Your photo does show the otter switch wires near the dizzy (green/pink) but I guess that TVR used standard looms and just 'tweaked' them for the special installations?

Sorry I thought you'd said it was LHD previously, my memory is not what it was hehe Still not so many pre-serps with all that extra 'stuff' wink

Barkychoc

7,848 posts

235 months

Sunday 15th February 2009
quotequote all
My suspicion is that it has a Landrover type water pump not SD1 style from those brackets that are visible.