how do i spot the difference between 400 and 500
how do i spot the difference between 400 and 500
Author
Discussion

al 350i

Original Poster:

974 posts

226 months

Sunday 15th February 2009
quotequote all
hello can anyone help, i've been offered a chimera 1996 (door buttons behind door), the paper work show the car to be a 4.0 and the owner believes this to be true but they only took the car to settle a deal and have no love or interest for it and just want their money back. on closer inspection i noticed that the plenum chamber has 500 HC on it and the rocker covers are purple it is also running on the griffith wheels, could it be that somebody has just added some cosmetic changes to make it look like a 500? is there any other details on the engine that would be unique to a 500? the car is HPI clear and seems genuine, i can only assume that at some point the engine has been changed, may be for a secondhand unit from a breakers and they also had the wheels at the same time! did the 500 chimera use bigger brakes or any other upgrades compared to the 4.0?

if anyone could give me any more info that might help me make a more informed judgement it would be most appreciated. thanks

V8 Animal

6,015 posts

241 months

Sunday 15th February 2009
quotequote all
Sounds like a 5L to me does the engine number correspond with the V5?
Boot badge should say 500.
Bigger front brakes 260mm but they could have been changed like the wheels.
VIN Plate on wing what does that say?

Badmutha

658 posts

224 months

Sunday 15th February 2009
quotequote all
Take it out and floor it biggrin

AntonyJ

5,254 posts

312 months

Sunday 15th February 2009
quotequote all
Take a 6mm allen key and lift the plenum chamber off(if they will let you) 45mm straight trumpets? 500.

al 350i

Original Poster:

974 posts

226 months

Sunday 15th February 2009
quotequote all
no 500 badge on back, engine number on chassis and paper work say "37A40P4001", where do i need to look on engine block to see if number matches?
not quite sure if they are going to let me take engine apart? some people are a little funny like that! lol

AntonyJ

5,254 posts

312 months

Sunday 15th February 2009
quotequote all
Engine number is located on the top of the block ,nearside. But usually obscured by the manifolds.
Cant think of any easy way except what I have suggested, maybe others will have other ideas.

dlewis

316 posts

300 months

Sunday 15th February 2009
quotequote all
measure the stroke?
Dave

Blues

8,546 posts

250 months

Sunday 15th February 2009
quotequote all
Take the ECU out from by the battery in the front passenger footwell. TVR usually hand write the engine size on the outer case.

GreenV8S

31,027 posts

315 months

Sunday 15th February 2009
quotequote all
This time of year there's so little grip that the difference in power levels isn't obviously demonstrable. But if you can get a dry straight grippy road, then with the car rolling along at 2000 rpm in first gear if you roll the throttle open the difference is quite obvious. A typical 400 will accelerate without wheelspin. A typical 450 will be scrabbling for grip. A typical 500 will spin the wheels easily. The problem with this test is that at this time of year it's hard to find a dry straight grippy road - even a 400 will spin the wheels happily enough when the tyres are freezing cold.

2 sMoKiN bArReLs

32,048 posts

266 months

Sunday 15th February 2009
quotequote all
V8 Animal said:
Boot badge should say 500.
Not necessarily. This badge was introduced a bit later.

steve-V8s

2,924 posts

279 months

Sunday 15th February 2009
quotequote all
To accommodate the 500 crank the sump front is slightly bowed ( whacked from the inside with a hammer) can’t say for certain if the 450 also had that. You could try calling the TVR car club they may have some history on the car. How about the V5 does that not show the previous owner ?

al 350i

Original Poster:

974 posts

226 months

Monday 16th February 2009
quotequote all
after alot of consideration, i have decided to leave the chimera. but i would like to thank everyone for all their help.

Graham

16,381 posts

315 months

Monday 16th February 2009
quotequote all
on a 96 car the chassis and brakes will be the same on the 400 and the 500. you could also get the 400 with the griff wheels new from the factory.. mine came with them as an option.

glow worm

7,525 posts

258 months

Monday 16th February 2009
quotequote all
I'm sure its in the VIN code TVR always included model/variant/engine in the code, but also in the engine number...my 450s engine number starts 37A45... are 400s 37A40 and 500s 37A50 ? ... just guessing.

Just found my Rimmer Bros catalogue for RV8s which lists all ROVER V8 ENGINE NUMBERS TVR Griff/Chim 500 are 37A50P...4.3s 47a43P .... and Chim 500 47A50P (for some reason).350is 37A00. Cmin 400s either 37A40 or 47A40. Morgans S46D.



Edited by glow worm on Monday 16th February 09:49

spend

12,581 posts

282 months

Monday 16th February 2009
quotequote all
Engine no will show CC for a TVRPower engine.. However, it might have had a stoker kit? then are the heads 5.0BV spec & the rest... It might even be 4.0 with a just 500 Trumpet base and plenum fitted. What a minefield if any changes like this are not documented ~ walk away wink

al 350i

Original Poster:

974 posts

226 months

Monday 16th February 2009
quotequote all
documents are the biggest problem with this car as there are'nt any! no logbook, no service history and no m.o.t. i know what your thinking but i was only looking for something to use for trackdays and i've bought cars before without log books, just a case of filling out a v62 form on behalf of the owner and paying the £25, wait a few weeks for new document to arrive at registered owners house then and only then pay them the money for the car. but the owner of this chimera seems a little reluctant to wait and wants to sell asap. i have a suspicsion that the car could be a clone and who ever has done it has failed to notice that the car is a 500 and they have used a standard chimera as the base for a clone! i could be wrong but it just not worth the risk.

i'm only airing this veiw as the car is advertised on this site and if anyone else has seen it and was thinking of getting a bargain then be very careful!!!! also i think it worth mentioning that if you see a really good car being advertised for a silly cheap price and the advert says that they can not answer the phone so please email me at _ _ _ _ _ _ @yahoo or similar and then sends you a story about why the car is no longer in the country and the will ship the car to you and so on, then DON'T BOTHER ITS A CON, autotrader is littered with loads of these and i've noticed a few popping up on pistonheads classified.




spend

12,581 posts

282 months

Monday 16th February 2009
quotequote all
If its advertised on here, then report it. There have been occasions in the past where members have joined to advertise, a perverse form of troll I suppose wink

al 350i

Original Poster:

974 posts

226 months

Monday 16th February 2009
quotequote all
its very hard to say for sure that the chimera is a clone or not and i don't think the current owner is even aware themselves, it could have just been through to many hands and been upgraded over the years, DVLA will not give out the address of the current owner so i can not check.

as for the dodgey email advertisers i will always report them as they get on my nerves! mad