FIesta Mk3 wiring diagram. . . . . . . . .

[Graham-P]

Does any one know where I can get a diagram of the multifunction switch (indicator column stalks) from for a Mk3 Fiesta, the one with the horn push on the light stalk? I need to know what does what on the indicator/lighting side.

ta

Graham

[M-Ster]

Hi i have a workshop manual with the diagrams in i can have a look and tell you what wires run to what if thats any help??

[andy-xr]

Have a look on the forums at fiestaturbo.com, I believe there's a sticky that has it on

[Nolar Dog]

Search this fourm going back a couple of weeks.

Someone else asked for a Fiesta wiring diagram and I sourced it and linked to it.
Can't remember the link now so you'll have to find the thread but it's not far away.

[Graham-P]

Thanks guys but I can't seem to find the info I need from those sites.

M-Ster. . would appreicate if you could tell me the destination of the pin numbers at the back of the indicator stalk.
I canwork out the indicator pins but need to know the what pin number is permanant live, side lights etc...
thanks

Graham

[ChrisRS]

Nolar Dog said:

Search this fourm going back a couple of weeks.

Someone else asked for a Fiesta wiring diagram and I sourced it and linked to it.
Can't remember the link now so you'll have to find the thread but it's not far away.

http://www.scribd.com/doc/8204594/Ford-Fiesta-19952001-Zetec-Wiring-Diagram-Petrol-and-Diesel

[Nolar Dog]

Graham-P said:

I need to know what does what on the indicator/lighting side.

Actually, what colours do you have at the plug? Tell me them and I can tell you what they all do.

Is it a black and yellow plug with Black/Green, Black/White and a solid red or is it the later type with lots of yellows with various tracers?

[Graham-P]

I am actually putting these in my car (not a Fiesta) (Ultima)and all I have is the stalks and a multi plug that needs wiring into my main loom. I thought the best solution was to identify the pin numbers on the back of the switch and work from there.

Graham

[andy-xr]

Graham, I cant link you to the info directly, but check again on the forum I posted earlier under the Technical Help/Queries section, 4th link down

[Graham-P]

andy-xr said:

Graham, I cant link you to the info directly, but check again on the forum I posted earlier under the Technical Help/Queries section, 4th link down

Looks like I have found the internal diagram of the multifuntion switch, so I should be able to suss it out from that!
Watch this space!!!
thanks

Graham