Centre Console
Centre Console
Author
Discussion

saddpj

Original Poster:

28 posts

242 months

Sunday 22nd February 2009
quotequote all
I want to remove the centre console in order to replace the gaiters of the gear stick, brake handle and door knob. According to the Bible there are two bolts behind the seats. Can someone please enlighten me because I cannot find them. Quite simply, how do I remove the centre console?

Foggy

S7Paul

2,103 posts

265 months

Sunday 22nd February 2009
quotequote all
Lift the base of the trinket tray out and you should see two screw heads. Note that if you're trying to remove the centre console completely you'll have great fun with the door-operating cables and their associated hardware.

saddpj

Original Poster:

28 posts

242 months

Monday 23rd February 2009
quotequote all
Thank you for that. I was looking for something more substantial than a couple of screws!!!

Thank you also for the warning re the removal of the console. Is there any other way I can replace all three gaiters?

scotty_d

6,795 posts

225 months

Monday 23rd February 2009
quotequote all
I have just had mine in and out for a re-trim its not hard at all 3 screws 2 forward and one under the rear cubby hole thing. the hardest is to get it past the hand brake so may have to slacken it off. It is in 3 parts the bolsters, centre and the gaters area un-bolt aswell. but like said above if removing the cables for the doors dont unless you have to its a pain to feed them back through.

S7Paul

2,103 posts

265 months

Monday 23rd February 2009
quotequote all
The difficulty I was alluding to is that the door cables run over the top of a U-shaped metal bracket just before the door opener knob mechanism. The bracket is bolted to the console top, so it's very difficult to lift the console top any distance, and very fiddly to remove the bracket in situ. Or at least mine was, your car may be different.