creamy oil filler cap
creamy oil filler cap
Author
Discussion

mr-manners

Original Poster:

185 posts

214 months

Wednesday 25th February 2009
quotequote all
checking over the car today and noticed a thick creamy gunge in my oil filler cap,should i be worried?

Gadgeroonie

5,362 posts

265 months

Wednesday 25th February 2009
quotequote all
not really worried - i would give it an oil change asap

jamie g

516 posts

245 months

Wednesday 25th February 2009
quotequote all
If it is just in the cap I wouldn't worry. Damp cold conditions and short trips can cause it.

TuxMan

9,011 posts

267 months

Wednesday 25th February 2009
quotequote all
might be worth checking the rest of the breather system as well ,mine was full of the stuff .

Duke Thrust

1,680 posts

268 months

Thursday 26th February 2009
quotequote all
If the air in the crankcase is damp then as the engine heats up the 'steam' will rise to the high points in the engine, ie the filler cap.

Worth changing the oil and keep a close eye on it. Have you looked at the water tank? Any nasties on the water surface?


mr-manners

Original Poster:

185 posts

214 months

Thursday 26th February 2009
quotequote all
Evening chaps,thanks for the advise,i checked the breather pipes today and there was quite a bit of gunk in there so ive cleaned them out.I have been doing a few short trips lately,will have to start taking the long way to work!

BTW i only had the oil changed 2 weeks/200 miles ago,changed the turbo/coolant hoses aswell as they were a bit drippy

got a rolling road session booked tomorrow see if she's running how she should,been cutting out at roundabouts/junctions........


TuxMan

9,011 posts

267 months

Thursday 26th February 2009
quotequote all
Hi did you check the steel oil breather tanks ?? mine was full of crap !!

ShadownINja

80,022 posts

311 months

Thursday 26th February 2009
quotequote all
mr-manners said:
will have to start taking the long way to work!
As if you needed an excuse. smile

mr-manners

Original Poster:

185 posts

214 months

Thursday 26th February 2009
quotequote all
TuxMan said:
Hi did you check the steel oil breather tanks ?? mine was full of crap !!
Hi Simon, yeah mine are full of it too,how did you clean those?

mr-manners

Original Poster:

185 posts

214 months

Thursday 26th February 2009
quotequote all
ShadownINja said:
mr-manners said:
will have to start taking the long way to work!
As if you needed an excuse. smile
laugh




TuxMan

9,011 posts

267 months

Thursday 26th February 2009
quotequote all
Hi Mr manners ....i think this is a pretty major issue as all the crap in that tank flows straight into the sump !!! get in on the group buy for a new alloy tank QUICK !!!!! this will sort out the problem . remember the biggest problem with the steel tank is it rusts !!! inside .

mr-manners

Original Poster:

185 posts

214 months

Thursday 26th February 2009
quotequote all
TuxMan said:
Hi Mr manners ....i think this is a pretty major issue as all the crap in that tank flows straight into the sump !!! get in on the group buy for a new alloy tank QUICK !!!!! this will sort out the problem . remember the biggest problem with the steel tank is it rusts !!! inside .
put my name down,hope i'm not too late...

cheers simon

S26VE P

2,174 posts

271 months

Friday 27th February 2009
quotequote all
I did the same and jumped on before i missed out. biggrinbiggrin

NobleGuy

7,133 posts

244 months

Friday 27th February 2009
quotequote all
mr-manners said:
TuxMan said:
Hi did you check the steel oil breather tanks ?? mine was full of crap !!
Hi Simon, yeah mine are full of it too,how did you clean those?
Just a temporary measure until I get the new one, but I half-filled mine a couple of times with methylated spirit, managed to get it everywhere as it's quite hard to shake with those 3 holes positioned where they are. Then let it dry for a couple of days and shook out the many loose bits of crusted metal/crap. Every time I thought I was done another little bit started rattling inside shoot. Grrrr!

TuxMan

9,011 posts

267 months

Friday 27th February 2009
quotequote all
If the tank is rusty inside i would NOT use it !!! unless you put a filter in the return to the sump .

i have cleaned all my pipes by washing the in petrol then blowing through with airline ,i have also dropped a small piece of string through them tied a small piece of cloth and pulled it through (soaked in petrol ) . simon

mr-manners

Original Poster:

185 posts

214 months

Friday 27th February 2009
quotequote all
TuxMan said:
If the tank is rusty inside i would NOT use it !!! unless you put a filter in the return to the sump .

i have cleaned all my pipes by washing the in petrol then blowing through with airline ,i have also dropped a small piece of string through them tied a small piece of cloth and pulled it through (soaked in petrol ) . simon
my tank doesnt have any rust in just the salad cream!

still probably best to rest her while the nice shiney tanks arrive!

thanks again simon

gaz 7404

326 posts

234 months

Friday 27th February 2009
quotequote all
Bet you a fiver it has!

art411y

832 posts

249 months

Saturday 28th February 2009
quotequote all
ripped my original one apart as i had bought a new alloy one.looking down the holes it did seem fine but was a right mess when opened up

gaz 7404

326 posts

234 months

Saturday 28th February 2009
quotequote all
Same here.

TuxMan

9,011 posts

267 months

Saturday 28th February 2009
quotequote all
and mine !!! hell of a mess