Dunlop sp9000 front tyre pressures.
Discussion
As the title says really.
I have done a search but couldn't find any answers.
I recently fitted 205/55 ZR15 Dunlop SP9000's on to the front of the chim.
I have been running them at 24psi, but when pushing the car hard round corners the front seems to wash-out wide. Am I running them too high pressures?
Anyone been running them and know what pressures to use?
I have them on the rear too at 26 psi but not had any problems with them so far.
Thanks in advance.
Ads
I have done a search but couldn't find any answers.
I recently fitted 205/55 ZR15 Dunlop SP9000's on to the front of the chim.
I have been running them at 24psi, but when pushing the car hard round corners the front seems to wash-out wide. Am I running them too high pressures?
Anyone been running them and know what pressures to use?
I have them on the rear too at 26 psi but not had any problems with them so far.
Thanks in advance.
Ads
I think its a case of trial and error. I found that 27psi with exactly the same size/type of tyres worked well for me. Are you measuring the pressure with the garage gauge or a proper one. I only ask because when I put 27psi in at the garage my accurate home one showed them to be 31psi !!!!
Steve
Steve
24 front works for me too - how new are they ? maybe not scrubbed in yet.
I think you should have a look at your geometry and anti roll bar links. WHen I had Rose jointed ARB links fitted it transofrmed the handling, then I had new suspension fitted and it got even better.
Unfortunately you cant really dial out these kind of problems by playing with the settings.
FWIW I tried the 9000's at 26 and it was like ice driving .......
I think you should have a look at your geometry and anti roll bar links. WHen I had Rose jointed ARB links fitted it transofrmed the handling, then I had new suspension fitted and it got even better.
Unfortunately you cant really dial out these kind of problems by playing with the settings.
FWIW I tried the 9000's at 26 and it was like ice driving .......
Many thanks to everyone.
I am using my own proper pressure gauge. I never trust the garage ones, they are always wrong!
The tyres have only done probably 50 miles i guess. I will try them on 24psi for a bit longer and see how I go.
I'm running the standard suspension setup. I'll check my drop links. Geo should be ok, it was done in the last service, about 1000 miles ago, but probably worth getting it checked.
I'm running 26 psi on the back and they seem to be good, so we will see how 24 is on the front.
Cheers guys.
P.S bigdods, looks like yours is the same colour as mine! i like your choice
I am using my own proper pressure gauge. I never trust the garage ones, they are always wrong!

The tyres have only done probably 50 miles i guess. I will try them on 24psi for a bit longer and see how I go.
I'm running the standard suspension setup. I'll check my drop links. Geo should be ok, it was done in the last service, about 1000 miles ago, but probably worth getting it checked.
I'm running 26 psi on the back and they seem to be good, so we will see how 24 is on the front.
Cheers guys.

P.S bigdods, looks like yours is the same colour as mine! i like your choice

Edited by ads on Friday 27th February 19:21
ads said:
Many thanks to everyone.
The tyres have only done probably 50 miles i guess.
I think you may have your answer. You'll need a few hundred and some decent heat cycles to scrub them in. I was told by someone in the know that a scrubbed in tyre surface will have a suede like finish, until you have that its all slip/slide....The tyres have only done probably 50 miles i guess.
ads said:
P.S bigdods, looks like yours is the same colour as mine! i like your choice 
Blue ones are of course fastest 

Edited by bigdods on Friday 27th February 21:06
Edited by bigdods on Friday 27th February 21:06
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



