Removing inlet follower shaft.. HELP!
Discussion
Got the bottom pulley and front casing off no problem, cam is out and i hit the first problem.
I have removed the end plug at the front and the grub screw in the side of the head but the shaft wont budge, i have looked all around for another cant cant find one.
What am i missing, having refered to the manual (Grahams sag manual), from my interpritation the inlet has one in the side and the exhaust has one in the end. I have checked all round the back with a mirror.
I have removed the end plug at the front and the grub screw in the side of the head but the shaft wont budge, i have looked all around for another cant cant find one.
What am i missing, having refered to the manual (Grahams sag manual), from my interpritation the inlet has one in the side and the exhaust has one in the end. I have checked all round the back with a mirror.
Found the last grub screw thanks to Richard90, i had tried the said hole but because some idiot has messed the hex up the allen key would not go in. Gave it a tap and it went in and its now out.
Just to confirm for anyone else searching its in the hole closest to the bulkhead, that one of the cam cover bolts also uses.
Just to confirm for anyone else searching its in the hole closest to the bulkhead, that one of the cam cover bolts also uses.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff