Best place for wheel geometry set up in North West
Best place for wheel geometry set up in North West
Author
Discussion

lazyitus

Original Poster:

19,931 posts

294 months

Wednesday 5th November 2003
quotequote all
For my Griffith.

Any ideas?

Plus, what do I really need to know with regards to this? i.e: Is there a set approved norm etc...

NHyde

1,427 posts

276 months

Wednesday 5th November 2003
quotequote all
Harveys in Northwich , do all the set ups for Christopher Neils who supply all the figures .

lazyitus

Original Poster:

19,931 posts

294 months

Wednesday 5th November 2003
quotequote all
Hi Neil,

Do you have any address or phone number for Harveys and an aprox cost.

P.S: Bet the SEAC sounds well under the runway! (Running at the nominated speed limit of course)

NHyde

1,427 posts

276 months

Wednesday 5th November 2003
quotequote all
tel # 01606 48888 , last time I had the wedge front end done was £45 . Not had a full front to rear done but the guys know their stuff and the prices are reasonable .

Went through the tunnel about a week ago after they had reopened both lanes , me in SEAC , MrsH in the 400 . AWESOME !!!!!!!!!!!!!!!! We should do it all again .

lazyitus

Original Poster:

19,931 posts

294 months

Thursday 6th November 2003
quotequote all
Hey Quinny,

Is that your Griff, the bluey/green one. Spoke to you at three sisters back in April?

phlap

563 posts

280 months

Thursday 6th November 2003
quotequote all
...And I thought I was the only one who nips to the petrol station and always seems to end up going through the tunnel under Manchester airport runway. And back.

jonny tvr

4,548 posts

309 months

Thursday 6th November 2003
quotequote all
....and me in my Cerby with decat pipes sounds excellent

lazyitus

Original Poster:

19,931 posts

294 months

Thursday 6th November 2003
quotequote all
I can see another runway blast coming up. I make it four so far!

B19GRR

1,980 posts

284 months

Thursday 6th November 2003
quotequote all
You might want to check that Harveys actually set the camber and castor. The way CN works AFAIK with Elises is to send the to Harveys have them measure everything and set the toe then CN fiddle with the camber/caster shims using the data supplied.

B19GRR

1,980 posts

284 months

Thursday 6th November 2003
quotequote all
Oh BTW I've been recommended ProSport in Stockport by an Elise expert and soon to be Tamora owner.

Prosport Ltd
Unit 18, Battersea Rd
Stockport Cheshire
SK4 3EA
Tel: 0161 432 9999

NHyde

1,427 posts

276 months

Thursday 6th November 2003
quotequote all
Five , we're greedy , bringing the 400 and the Sausage Egg And Chips !!!!!!!!

Lets do it soon , sure Jessica would be up for it !



>> Edited by NHyde on Thursday 6th November 17:16

stainless_steve

6,050 posts

286 months

Thursday 6th November 2003
quotequote all

add another SEAC

Pies

13,116 posts

284 months

Thursday 6th November 2003
quotequote all
Steve your wear that smiley out,Ted will have to get it serviced very frequently at this rate

stainless_steve

6,050 posts

286 months

Thursday 6th November 2003
quotequote all
Pies said:
Steve your wear that smiley out,Ted will have to get it serviced very frequently at this rate

Thats the best smiley yet
fantastic

Pies

13,116 posts

284 months

Thursday 6th November 2003
quotequote all
This has a bit more

stainless_steve

6,050 posts

286 months

Thursday 6th November 2003
quotequote all
Thats more like a TVR

NHyde

1,427 posts

276 months

Thursday 6th November 2003
quotequote all
May be we should just have a BBW meet in the tunnel !!




THE DARK SIDE !

NHyde

1,427 posts

276 months

Thursday 6th November 2003
quotequote all
Just while Mrs H isn't looking

lazyitus

Original Poster:

19,931 posts

294 months

Thursday 6th November 2003
quotequote all
lazyitus said:
I can see another runway blast coming up. I make it four so far!


SEE EVENTS/MEETINGS

lazyitus

Original Poster:

19,931 posts

294 months

Thursday 6th November 2003
quotequote all
lazyitus said:

lazyitus said:
I can see another runway blast coming up. I make it four so far!



<big>SEE EVENTS/MEETINGS