correct oil choice for Chim 400
Discussion
i need to top up the oil in the chim (ie. between services).
not sure what the oil is but i guess it's 10w/50?
is there a shell option that would work? (my local petrol-station is a shell station).
cheers
(p.s. i haven't a clue about these things, but know enough that when the dipstick looks low, i should put some more oil in!)
not sure what the oil is but i guess it's 10w/50?
is there a shell option that would work? (my local petrol-station is a shell station).
cheers
(p.s. i haven't a clue about these things, but know enough that when the dipstick looks low, i should put some more oil in!)
I use 10W40 Castrol Magnatec, have done for 4 years now no problems at all. The recommnended oil is mobil 1 but thats too thin makes the engine noisy and a bit rattly.
ETA - theres a sticky thread in General TVR stuff tells you all you need to know http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
ETA - theres a sticky thread in General TVR stuff tells you all you need to know http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Edited by bigdods on Monday 2nd March 17:03
bigdods said:
I use 10W40 Castrol Magnatec, have done for 4 years now no problems at all. The recommnended oil is mobil 1 but thats too thin makes the engine noisy and a bit rattly.
ETA - theres a sticky thread in General TVR stuff tells you all you need to know http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
+1 for the Castrol mag 10w 40 i have been told this is good stuff so i bought a 25L drum for the next couple of years.ETA - theres a sticky thread in General TVR stuff tells you all you need to know http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Edited by bigdods on Monday 2nd March 17:03
My chim has done 84000 miles and serviced regulary i always use MOBIL 1 FULLY SYNTHETIC 15/50 due to the age of the engine and the mileage. i know that may not matter but works for me. a mate of mine had a 1997 porker and he changed the oil himself and put mobil 1 00/40 in and blew his engine up a little while later blasting down the motorway!(all together now 

)
i always bring it up when i see him he now drives a rice rocket


)i always bring it up when i see him he now drives a rice rocket

Edited by MADMAX2 on Monday 2nd March 17:17
Right, I have just been down this road myself. I am a tech so it never normally bothers me but for some reason I got all anal over this one!
I settled on Mobil One 15w50, It is fully synth, has a good working range and is slightly thicker than 10w40 which I really think is a touch thin.
On the classic Yanks I work on we use mineral base 15w40 which is fine but cheap and needs to be changed often, On the other end 20w50 could cause the lifters to 'pump up' at high revs.
So I would say Mobil One 15w50, available from Halfords and if you get a trade card it saves a fair amount, BTW mine took 6 litres with the filter change.
I settled on Mobil One 15w50, It is fully synth, has a good working range and is slightly thicker than 10w40 which I really think is a touch thin.
On the classic Yanks I work on we use mineral base 15w40 which is fine but cheap and needs to be changed often, On the other end 20w50 could cause the lifters to 'pump up' at high revs.
So I would say Mobil One 15w50, available from Halfords and if you get a trade card it saves a fair amount, BTW mine took 6 litres with the filter change.
Valvoline Racing VR1 20/50
This is a mineral oil and was recommended by v8 developments and others I know that service and race these engines.
Can anybody tell me what downsides there might be of a mineral vs synthetic oil?
ETA I have a 4.5 but can't see it would make much difference
This is a mineral oil and was recommended by v8 developments and others I know that service and race these engines.
Can anybody tell me what downsides there might be of a mineral vs synthetic oil?
ETA I have a 4.5 but can't see it would make much difference
Edited by thegman on Monday 2nd March 20:53
Minerals that are changed often are fine, if left for a while they will sludge up the motor and the RV8 is a bugger for this (look at poorly serviced Range Rovers) I have had to dig the valve springs out of some!
TVR's tend to be better as they are better cared for as a rule. Synths have a wider working range and do not sludge.
5w50 ? is that a typo? if not 5 I am sure is to thin for an RV8.
20w50 Valvoline is a great oil BTW, used it in many race V8's (American) but remember the thicker the oil the more power it takes to turn the pump! Valvoline 20w50 was my second choice but the Mobil seems a better choice this time.
TVR's tend to be better as they are better cared for as a rule. Synths have a wider working range and do not sludge.
5w50 ? is that a typo? if not 5 I am sure is to thin for an RV8.
20w50 Valvoline is a great oil BTW, used it in many race V8's (American) but remember the thicker the oil the more power it takes to turn the pump! Valvoline 20w50 was my second choice but the Mobil seems a better choice this time.
Silkolene Pro R 15W50 a Fully synthetic Ester based oil.
See Opie Oils on here TVR General Stuff & Gossip: http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Excellent price for a very high grade oil, especially when on "offer".
Trev
See Opie Oils on here TVR General Stuff & Gossip: http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Excellent price for a very high grade oil, especially when on "offer".
Trev
tvr barnet use 10/40 because it is cheap. i would go a little higher 50 or 60 as it needs to be pritty thick when hot .thin on start up .ive tried all sorts of oils and ive took advice from rpi and v8d and used 20/50.duckeries engineering On flebay sell 2.5 gallon of mineral oil for £25 they even sell 20/50 fully synthetic which is un heard of .
Edited by daz the plumber on Tuesday 3rd March 21:51
daz the plumber said:
tvr barnet use 10/40 because it is cheap. i would go a little higher 50 or 60 as it needs to be pritty thick when hot .thin on start up .ive tried all sorts of oils and ive took advice from rpi and v8d and used 20/50.
Would not say Castrol Magnatec is a cheap oil, it is a balance that should give protection from start up right through the whole temperature range. Athlon said:
Minerals that are changed often are fine, if left for a while they will sludge up the motor and the RV8 is a bugger for this (look at poorly serviced Range Rovers) I have had to dig the valve springs out of some!
TVR's tend to be better as they are better cared for as a rule. Synths have a wider working range and do not sludge.
5w50 ? is that a typo? if not 5 I am sure is to thin for an RV8.
20w50 Valvoline is a great oil BTW, used it in many race V8's (American) but remember the thicker the oil the more power it takes to turn the pump! Valvoline 20w50 was my second choice but the Mobil seems a better choice this time.
No, that’s not a typo.TVR's tend to be better as they are better cared for as a rule. Synths have a wider working range and do not sludge.
5w50 ? is that a typo? if not 5 I am sure is to thin for an RV8.
20w50 Valvoline is a great oil BTW, used it in many race V8's (American) but remember the thicker the oil the more power it takes to turn the pump! Valvoline 20w50 was my second choice but the Mobil seems a better choice this time.
V8 Developments built my engine and this was Rob’s recommendation. The Mobil 1 goes a bit thin at higher temperatures for their liking.
Valvoline VR1 comes in three grades.
The 5/50 is fully synthetic.
The 10/60 is semi synthetic.
The 20/50 is mineral.
I get a rock steady 60psi on the oil gauge under all engine temperatures and RPM. It reaches pressure whilst still cranking and before firing, which I like to see. It’s not slow to catch either.
http://www.valvolineeurope.com/english/products/al...
Uncle Fester said:
Athlon said:
Minerals that are changed often are fine, if left for a while they will sludge up the motor and the RV8 is a bugger for this (look at poorly serviced Range Rovers) I have had to dig the valve springs out of some!
TVR's tend to be better as they are better cared for as a rule. Synths have a wider working range and do not sludge.
5w50 ? is that a typo? if not 5 I am sure is to thin for an RV8.
20w50 Valvoline is a great oil BTW, used it in many race V8's (American) but remember the thicker the oil the more power it takes to turn the pump! Valvoline 20w50 was my second choice but the Mobil seems a better choice this time.
No, that’s not a typo.TVR's tend to be better as they are better cared for as a rule. Synths have a wider working range and do not sludge.
5w50 ? is that a typo? if not 5 I am sure is to thin for an RV8.
20w50 Valvoline is a great oil BTW, used it in many race V8's (American) but remember the thicker the oil the more power it takes to turn the pump! Valvoline 20w50 was my second choice but the Mobil seems a better choice this time.
V8 Developments built my engine and this was Rob’s recommendation. The Mobil 1 goes a bit thin at higher temperatures for their liking.
Valvoline VR1 comes in three grades.
The 5/50 is fully synthetic.
The 10/60 is semi synthetic.
The 20/50 is mineral.
I get a rock steady 60psi on the oil gauge under all engine temperatures and RPM. It reaches pressure whilst still cranking and before firing, which I like to see. It’s not slow to catch either.
http://www.valvolineeurope.com/english/products/al...
To answer the question - you should use to top up the oil thats been put at the time of teh service ie if 10/40 used then you should top up with 10/40.
This thread seems to have morphed into what oil should i use. Persoanlly I have used 5/40, 10/50, 15/50. I found 5 too thin & consumed plenty and 15 too thick on cold start up. Therefore 10/50 full synthetic changed annually seems ultimate choice to me
Note synthetics 'changed regularly' is pointless IMO as it defeats the objective of using a fully synthetic designed to last longer than mineral based oils, not to mention cost.
This thread seems to have morphed into what oil should i use. Persoanlly I have used 5/40, 10/50, 15/50. I found 5 too thin & consumed plenty and 15 too thick on cold start up. Therefore 10/50 full synthetic changed annually seems ultimate choice to me
Note synthetics 'changed regularly' is pointless IMO as it defeats the objective of using a fully synthetic designed to last longer than mineral based oils, not to mention cost.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




