Help with starting problem needed
Help with starting problem needed
Author
Discussion

60mph

Original Poster:

254 posts

214 months

Monday 2nd March 2009
quotequote all
After 5 full pumps of the throttle the engine fires up from cold but if you let it die within 15 secs or so it's allmost immpossible to get it started again and it nearly flattens the battery.Is this because the plugs have sooted up and havn't had a chance to burn off?

6.3 SBC .AM Sp 500 HP. Plugs accel 416. Carb Holley 750 cfm double pumper.

Are others like this and if so what's the trick?Starts from hoy ok.Idle mixture = greyish/brown plugs = ok.

Thank you
Frank

scooby_doo_do

137 posts

225 months

Monday 2nd March 2009
quotequote all
mine is a bit like this...

I've worked out two pumps of the accelerator, and then try, if it cuts out i generally leave it for a minute or so before trying again..

It was a right pain to get going, until i found that the holley has a choke on the opposite side.. I manually use this on startup now.

The other way, that works a treat, is to put some carb cleaner in the holley's and then turn over.. Not ideal, but it starts.

Craig.

Rusti Evo

537 posts

223 months

Monday 2nd March 2009
quotequote all
Knew that routine well!!! If you don't keep it going the damn thing floods! Leave it an hour and bung in some new plugs.

In the end I replaced the cursed double pumper with a Street Avenger, never a problem after that.

Great move was fixing up a choke cable to advance the slow running. If it can be set to about 2000rpm minimum then it rarely cuts out.

wb200

26 posts

227 months

Tuesday 3rd March 2009
quotequote all
Had a bit of a problem as well. While testing the car the battery would go flat after a couple of tries. So decided to upgrade the batt itself to a Varley Red Top 40. Never had a problem thereafter.

60mph

Original Poster:

254 posts

214 months

Tuesday 3rd March 2009
quotequote all
Rusti
Do you have a part Number for your Sreet Avenger please . Are there any 'downsides'?

Frank

Rusti Evo

537 posts

223 months

Tuesday 3rd March 2009
quotequote all
60mph said:
Rusti
Do you have a part Number for your Sreet Avenger please . Are there any 'downsides'?

Frank
I used the 4160 750 from Real Steel. Vac secondaries so it doesn't tend to puke fuel in the motor. Excellent starting. Maybe doesn't have the instantaneous throttle response of the D/P but debatable.

Assuming you have binned the manual choke blade, using the choke as a hand throttle lets you (with a little practice) to drive straight off down the road just like a proper car!!!!!!!! Brilliant.

Perhaps the best bet might be to get a QFT from Dr. Dee. I believe Wilder has one of his engines so probably has a QFT on there. Might be worth a chat with him.

60mph

Original Poster:

254 posts

214 months

Tuesday 3rd March 2009
quotequote all
Rusti
Thanks for that.I can't find Wilder or Dr Dee.Can you direct me please?
Thanks
Frank

738 driver

1,202 posts

222 months

Tuesday 3rd March 2009
quotequote all
Frank,

Top of this page...members tab, click... then click again on directory tab... type the members you are searching for and look on their profiles for e-mail/contacts etc. I think Wilder has his business name on there..so you may be able to contact him via work !

60mph

Original Poster:

254 posts

214 months

Tuesday 3rd March 2009
quotequote all
Thanks AGAIN 738 .I did try that but wasn't sure I had the right man.Anyway I,ve sent him an email so perhaps I,ll find out!
Frank

DHGTR

1,196 posts

272 months

Tuesday 3rd March 2009
quotequote all
60mph said:
Rusti
Thanks for that.I can't find Wilder or Dr Dee.Can you direct me please?
Thanks
Frank
Dr Dee = fastcoauto@aol.com



Dave

fastco

75 posts

260 months

Thursday 5th March 2009
quotequote all
Hello .... i believe....J still has B/G...750CFM carb...very low miles not needed on the " Wild Thing"
can connect you.. Cheers! Dr,Dee

60mph

Original Poster:

254 posts

214 months

Thursday 5th March 2009
quotequote all
I've conquered my starting problem.I was over pumping before pressing the button . I now press the button and pump the throttle gently untill she fires up then keep pumping gently 'till she reaches temperature.

Thanks for advice.

Frank