4.5 mark adams chip in a 4l
4.5 mark adams chip in a 4l
Author
Discussion

daz the plumber

Original Poster:

14,997 posts

262 months

Wednesday 4th March 2009
quotequote all
tried the chip in my 4l, the car runs like s..t !put the old one back in and it runs fine .so what do i do now ?sell it or try and get it re mapped .

M@H

11,298 posts

303 months

Wednesday 4th March 2009
quotequote all
..did you really expect it to improve things !?

Daz I have to say you scare me..! I have visions of your car being every bit of anything that might give some power to any size of Rover V8 that has sold on ebay in the last 18 months, all bolted onto one engine !

have you seen the enlarged throttled Plenum on ebay at present..? wink

Edited by M@H on Wednesday 4th March 13:03

oggs

8,819 posts

285 months

Wednesday 4th March 2009
quotequote all
daz the plumber 17thFeb said:
drives well , was fast to start with , my mate with the 5l said its the best he as been in .now with the 72mm throttle body and thermal plate i will be going straight by you , lol does it every time less than 5 seconds , i would say 4.5 easy

Edited by daz the plumber on Tuesday 17th February 01:08
http://pistonheads.com/gassing/topic.asp?h=0&t=646167&mid=42058

rigga

8,808 posts

232 months

Wednesday 4th March 2009
quotequote all
daz the plumber said:
tried the chip in my 4l, the car runs like s..t !put the old one back in and it runs fine .so what do i do now ?sell it or try and get it re mapped .
Couple of options spring to mind.

1)...Listen to the advise given to you on this and many other subjects you raise
2)... stick to the boiler repairs and leave your bloody car alone or entrust it to someone else who knows what they are on about


Somehow though i think this is not going to be the last thing you post about that has not gone right wink

Podie

46,649 posts

306 months

Wednesday 4th March 2009
quotequote all
er..? Doesn't MA use chip carriers..?

spend

12,581 posts

282 months

Wednesday 4th March 2009
quotequote all
Now't wrong with that chip mate, you need a new boiler, that 4.0's plainly just not man enough for the job.....simple really!

Ribol

12,000 posts

289 months

Wednesday 4th March 2009
quotequote all
Quinny said:
Looks like someone owes Ribol a quidyes
For some reason I always felt like my money was safe hehe

If such an organisation as the RSPCTVRs existed I would have reported the OP ages ago.

GreenV8S

31,027 posts

315 months

Wednesday 4th March 2009
quotequote all
daz the plumber said:
tried the chip in my 4l, the car runs like s..t !put the old one back in and it runs fine .so what do i do now ?sell it or try and get it re mapped .
If you can find somebody with an engine that matches what the chip was designed for, you could sell it to them. Or find somebody willing to take a chance (as you did) and buy it in the hope it works ok for them. Presumably it doesn't owe you much money. There is a chance that Mark would allow you to 'trade in' the old chip and give you a discount on new one that does suit your engine. In that case it's 'worth' whatever discount Mark might choose to give you - if any.

Other than that the chip is worth the cost of a blank EPROM, which is a few pence.

Were you trying to solve any particular problem with this chip, or just generally hoping it would work better than standard?

spend

12,581 posts

282 months

Wednesday 4th March 2009
quotequote all
Quinny said:
The best solution would be to buy a 4.5 to match the chip, and fit thatyes
Careful Quinny!!!!! He's daft enough to buy an AJP and try & put in that yikesrofl

PS Tubbs is driving me mad... he's pining for another bone hehe

daz the plumber

Original Poster:

14,997 posts

262 months

Wednesday 4th March 2009
quotequote all
well i thought once you have the chip you can have it re programed to suit the engine, i tried it on a off chance .ive heard good reports on these chips especialy from rpi.the chip worked well on the car i got it off .it just does not suit mine .its for a standard 4.5.i will contact mark and see if he can do anything for me .

nikman

878 posts

236 months

Wednesday 4th March 2009
quotequote all
daz the plumber said:
tried the chip in my 4l, the car runs like s..t !put the old one back in and it runs fine .so what do i do now ?sell it or try and get it re mapped .
This IS a wind up...isn't it?? It just has to be - especially after

...daz the plumber 17thFeb said:
drives well , was fast to start with , my mate with the 5l said its the best he as been in .now with the 72mm throttle body and thermal plate i will be going straight by you , lol does it every time less than 5 seconds , i would say 4.5 easy...

Most here still seem to be taking this post as a serious question biggrin

Meatball

1,638 posts

241 months

Wednesday 4th March 2009
quotequote all
heheroflhehe

spend

12,581 posts

282 months

Wednesday 4th March 2009
quotequote all
Meatball said:
heheroflhehe
Did the thought of the MA - Daz phone conversation cross your mind?

nikman

878 posts

236 months

Wednesday 4th March 2009
quotequote all
spend said:
Meatball said:
heheroflhehe
Did the thought of the MA - Daz phone conversation cross your mind?

V8 Animal

6,015 posts

241 months

Wednesday 4th March 2009
quotequote all
Why didn't you take my advice and have it reprogrammened like i did to my chip.
Beggers believe that you posted this.

Uncle Fester

3,114 posts

239 months

Wednesday 4th March 2009
quotequote all


The 4.5 chip is designed for use with the Highline model. This compensates for the extra head of pressure, but would flood your engine.

You need the 4.0 chip because your roof is lower.

winkHTH

spend

12,581 posts

282 months

Wednesday 4th March 2009
quotequote all
Cheeky twart Fester!!!!! Thats my 4x dispenser hehe

Chimjunkie

2,879 posts

242 months

Wednesday 4th March 2009
quotequote all
Daz, Get in touch with Mark Adams. Dont expect to run any TVR on a shoe string budget unless you are a competent mechanic.

daz the plumber

Original Poster:

14,997 posts

262 months

Wednesday 4th March 2009
quotequote all
i only tried it , just trying to get in contact with mark , you do make a fuss !

Chimjunkie

2,879 posts

242 months

Wednesday 4th March 2009
quotequote all
daz the plumber said:
i only tried it , just trying to get in contact with mark , you do make a fuss !
Do persist. He is hard to get hold of. You will also not resent the cost of the work because the engine will be so sweet when he has finished with it! Good luck.