Lambda Sensor
Lambda Sensor
Author
Discussion

V8 Animal

Original Poster:

6,015 posts

241 months

Wednesday 4th March 2009
quotequote all
I need to replace one of my sensors according to my fault reader.
Tips on getting old one out do i have to butcher a 17mm dd socket or is there another way?
Also thinking of running the car a bit before attempting it to help break the seal by heating the exhaust don't think wd40 will help much.
Cheers

scotty_d

6,795 posts

225 months

Wednesday 4th March 2009
quotequote all
I butchered a box spanner put a slit up the side with a grinder to let the cable in did the job fine.

mt10argyll

407 posts

242 months

Wednesday 4th March 2009
quotequote all
I ran a grinder down a long 17mm socket works a treat
and filed off any burrs


spend

12,581 posts

282 months

Wednesday 4th March 2009
quotequote all
Run a grinder up a deep hex socket, only takes 10 mins. I'll be around your area Sat if you want to borrow one. IIRC I gave TCS some new sensors if you need any, don't know if he still has them.

V8 Animal

Original Poster:

6,015 posts

241 months

Wednesday 4th March 2009
quotequote all
spend said:
Run a grinder up a deep hex socket, only takes 10 mins. I'll be around your area Sat if you want to borrow one. IIRC I gave TCS some new sensors if you need any, don't know if he still has them.
I would like to take you up on your offer and if you have a new one spare i'll take that off you as well pay you of course.
PM me for my details.
Cheers dave
Paul

spend

12,581 posts

282 months

Wednesday 4th March 2009
quotequote all
Mail you later Paul wink

GreenV8S

31,027 posts

315 months

Wednesday 4th March 2009
quotequote all
Make sure you smooth the edges off if you take this approach because the high temperature silicone insulation on these wires is very soft. An alternative approach is to get a box spanner, take the terminals out of the housing (unclip very easily with a small screwdriver) and then just feed the wires down the middle of the box spanner.

V8 Animal

Original Poster:

6,015 posts

241 months

Thursday 5th March 2009
quotequote all
Reset my ECU today and driven 50 miles no faults showing up.
Any reson for this? Or could of been when i adjusted the AFM?
Still going to replace them read on the net that there about buggered after 10 years.
I just need 1 more anyone got one?
Cheers