how to separate the trumpet base from the inlet manifold
how to separate the trumpet base from the inlet manifold
Author
Discussion

slideways

Original Poster:

4,101 posts

252 months

Friday 6th March 2009
quotequote all
As the title suggests but with a twist, it looks like some twot has used silcoflex on it and i cant even get a stanley blade between them, any ideas so i dont do any damage most welcome.
thanks in advance
Rich

Johno

8,593 posts

313 months

Friday 6th March 2009
quotequote all
Rubber mallet, gentle tap. Obviously on the front corner and not a trumpet. Or just give it a firm tug by hand.

Sealant such as Hylamar is something I'd definitely use in sealing mine down. Maybe I'm an idiot wink

rev-erend

21,624 posts

315 months

Friday 6th March 2009
quotequote all
I really cannot remember if there are any other allen key bolts .. but when I split mine to add a thermal insulator - I just used a big lever bar (trolly jack handle) in one on the trumpet holes.. I think.

slideways

Original Poster:

4,101 posts

252 months

Friday 6th March 2009
quotequote all
thanks guys, i'd expect some kind of sealant but this stuff looks like licorice and has stuck like super glue
Rich

Pupp

13,038 posts

303 months

Friday 6th March 2009
quotequote all
slideways said:
thanks guys, i'd expect some kind of sealant but this stuff looks like licorice and has stuck like super glue
Rich
Sounds like it might be Wellseal.... good luck if so hehe

Barkychoc

7,848 posts

235 months

Friday 6th March 2009
quotequote all
Johno said:
Or just give it a firm tug by hand.
Are you sure you're on the right forum? rolleyes

spend

12,581 posts

282 months

Friday 6th March 2009
quotequote all
Barkychoc said:
Johno said:
Or just give it a firm tug by hand.
Are you sure you're on the right forum? rolleyes
What has come over you?

Johno

8,593 posts

313 months

Friday 6th March 2009
quotequote all
Barkychoc said:
Johno said:
Or just give it a firm tug by hand.
Are you sure you're on the right forum? rolleyes
Is this a lame joke ?

confused

pwd95

8,459 posts

269 months

Saturday 7th March 2009
quotequote all
Give it a generous 'tap' with something forgiving....yes

Direct from the side. yes

SimonV8ster

13,039 posts

259 months

Saturday 7th March 2009
quotequote all
Is it going to help by heating it all at all with something ?? Then whack it....smash

That Daddy

19,464 posts

252 months

Saturday 7th March 2009
quotequote all
Pupp said:
slideways said:
thanks guys, i'd expect some kind of sealant but this stuff looks like licorice and has stuck like super glue
Rich
Sounds like it might be Wellseal.... good luck if so hehe
Good stuff though smile