Wheel sizes (again,sorry...)
Wheel sizes (again,sorry...)
Author
Discussion

CuffiaDB

Original Poster:

174 posts

249 months

Sunday 8th March 2009
quotequote all
I've taken a shine to BK Racings BK299 wheels in anthracite, and I'd like to fit either 17"s all round, or 17" front, 18" rear (undecided).
Can anyone confirm for definite that they will fit??
I've tried unsucessfully to contact a PH member with similar taste (!)in wheels, and I'm unsure as to the issues with offsets, tyre size etc.
Any help would be much apprieciated.
Many thanks in advance,
Cuffia.

rigga

8,808 posts

232 months

Sunday 8th March 2009
quotequote all
To be sure they will fit,keep to standard width and offset,but increased wheel diameter.... if going to a wider rim then you need to calculate the difference from standard to the proposed new width,this is helpfull for that
http://marksink.com/tire_wheel_offset/offset.html

As a guide 7.5x17 et 35 all round works ok,as many chim oeners have fitted this size ford rs wheels with no problems,choice as they say is plentifull though
http://pistonheads.com/gassing/topic.asp?h=0&f...

CuffiaDB

Original Poster:

174 posts

249 months

Sunday 8th March 2009
quotequote all
Thanks rigga,
If they are et 38 (as i think they are, does that rule them out?
Cuffia.

JR

14,332 posts

289 months

Sunday 8th March 2009
quotequote all
CuffiaDB said:
Thanks rigga,
If they are et 38 (as i think they are, does that rule them out?
Cuffia.
Depends how you feel about spacers.
Also what do you want from the wheels and tyres? If you want wide rubber (245 upwards) then you'll need at least 8.5" rims and trying to get front and rear the same always means compromises.

CuffiaDB

Original Poster:

174 posts

249 months

Sunday 8th March 2009
quotequote all
Thanks for the response JR. I'm looking to fit wheels that look a little more contempory (sp?).
245 rears may be pushing it...do many of you have tyres that wide?
I enjoy the whole 'experience and occaision' of driving the Chimaera several times a week.So I'm not experienced enough (or mad enough) to go crazy on a public road...so whether I would notice any big dynamic differences (I'm afraid) is debatable!!
Your mention of spacers... does this mean that these wheels would stick further out from the side of the car? Is the difference only 3mm? Is the concern that they would rub the inside of the wheel arches?
Thanks for your patience with a numptys questions!!!
C.

JR

14,332 posts

289 months

Sunday 8th March 2009
quotequote all
CuffiaDB said:
Thanks for the response JR. I'm looking to fit wheels that look a little more contempory (sp?).
245 rears may be pushing it...do many of you have tyres that wide?
I enjoy the whole 'experience and occaision' of driving the Chimaera several times a week.So I'm not experienced enough (or mad enough) to go crazy on a public road...so whether I would notice any big dynamic differences (I'm afraid) is debatable!!
Your mention of spacers... does this mean that these wheels would stick further out from the side of the car? Is the difference only 3mm? Is the concern that they would rub the inside of the wheel arches?
Thanks for your patience with a numptys questions!!!
C.
The Chim was launched as a softer version of the griff and so had the 205 tyres at the front (griff 215, then 205 or 225) and 225 at the rear (griff 225, then 245.) Chim 500s and others at the owners request had the same 225/245 that the latter griffs had. 255 on the rear works out fine.

When it comes to the nitty gritty of rolling diameters then you have to compromise somewhere because you'll find yourself requiring a tyre wall inbetween profiles. From memory 215s at the front and 235s at the rear works well. Remember that the original rears were designed for 225 at 60 profile.

If you fitted 10mm spacers at the front then this would reduce a 38mm offset to 28mm. Original offset is 25mm. (Or inch at the front, inch and 3/8 at the rear.)

Dynamically you will notice much more from the change of wheel diameter than trying to fit 10 or 20mm more rubber at the rear. I'd think very carefully about fitting 18s which are too heavy IMHO although quite a few have done so.

Toyo tyres do a very good sizing chart.

CuffiaDB

Original Poster:

174 posts

249 months

Sunday 8th March 2009
quotequote all
Thanks JR, Thats much clearer....Why don't companies who sell wheels talk like that????
Cuffia.

haircutmike

22,511 posts

235 months

Sunday 8th March 2009
quotequote all
Got 17" on the front, 215x40.
18" rear, 235x40.

Works well but if you change tyres frequently, can work out expensive,
i.e; £600 plus for a set of toyo 888's
Apparently 18" are particulary expensive.
I am looking to change to a set of 17" for that reason, unless someone knows of a cheap supplier!



HCM.

daz the plumber

14,997 posts

262 months

Sunday 8th March 2009
quotequote all
hi i picked up team dynamics pro race 1.2
front 7x17 4x108 et 25

rear 8x17 4x108 et 35 came with fitting kit and a full set of falken tyres
front 215/40/17

rear 245/40/17 for less than £700 from deman tweaks .. when you sell your old wheels you can offset the difference .both front and rear tryres work out to be 3mm smaller, so its the closest your going to get .

Edited by daz the plumber on Sunday 8th March 21:24

slideways

4,101 posts

252 months

Sunday 8th March 2009
quotequote all
daz the plumber said:
hi i picked up team dynamics pro race 1.2
front 7x17 4x108 et 25

rear 8x17 4x108 et 35 came with fitting kit and a full set of falken tyres
front 215/40/17

rear 245/40/17 for less than £700 from deman tweaks .. when you sell your old wheels you can offset the difference .both front and rear tryres work out to be 3mm smaller, so its the closest your going to get .

Edited by daz the plumber on Sunday 8th March 21:24
got any photo's of your new wheels on the car daz??

daz the plumber

14,997 posts

262 months

Sunday 8th March 2009
quotequote all
not delivered untill wednesday, but i have been looking at wheels for months, these wheels are the best to go for , they are light weight and reasonably cheap.they will make the wheels to your specification .i dont think a few mm eather way will give any problems ,there is plenty of room each side of the wheel .

rigga

8,808 posts

232 months

Sunday 8th March 2009
quotequote all
My new 17" on a trial fit,now away being powder coated gunmetal in the centers,leaving the rims polished,and falken tyres to fit.....kinda spider esq in the spoke design i think


daz the plumber

14,997 posts

262 months

Sunday 8th March 2009
quotequote all
did you get them from fleabay?and are they only 7j front and rear , if they are the rear tyes fitted with 225 will look ridiculous.

rigga

8,808 posts

232 months

Sunday 8th March 2009
quotequote all
7.5j all round Daz ET35...... bit of a story with these as they were not the actual wheels i ordered,will start a thread and reveal all when they are completed and fitted...

daz the plumber

14,997 posts

262 months

Sunday 8th March 2009
quotequote all
i would go for some very good quality 10mm spacers for the front.the problem with the 7.5j you are restricted to 225 rear tyres and there 3mm higher than standard thats why i went for 245/40/17 which are 3mm smaller. your rear tyres will sit 6mm higher than mine .

captin slow

256 posts

214 months

Sunday 8th March 2009
quotequote all
rigga they are nice wheels but i think you would get better traction with tyresbiglaugh

rigga

8,808 posts

232 months

Sunday 8th March 2009
quotequote all
No spacers and not restricted to 225 rear tyres,tyres will be 215/40/17 front and 245/40/17 rear falken 452....as per griff 500 on 7.5 rims

daz the plumber

14,997 posts

262 months

Sunday 8th March 2009
quotequote all
thought you needed 8j to 9.5j for 245 tyres . !

rigga

8,808 posts

232 months

Sunday 8th March 2009
quotequote all
daz the plumber said:
thought you needed 8j to 9.5j for 245 tyres . !
Never bothered tvr when they released the cars did it?.....thats what is on my current 16" and will be on the 17"