Wanted! your old ECU loom
Discussion
Does anybody have an old fried ECU loom they can let me have (beer money waiting)?
I recently bought a Fault Code Reader only to find that, not only do i not have the plug on my loom, I don't even have the female pins and wires at the plug end of the loom.
So I only need the fault code reader plug and 4no. pins outs with a couple of foot of wire still attached to clip into my ecu plug.
I recently bought a Fault Code Reader only to find that, not only do i not have the plug on my loom, I don't even have the female pins and wires at the plug end of the loom.
So I only need the fault code reader plug and 4no. pins outs with a couple of foot of wire still attached to clip into my ecu plug.
As the loom is now getting chopped up into its component parts I would like to put a bid in for as much of the Lambda wiring as is available, idealy the bit that extends the sensor lead to the sensor + the part of the main loom that the extender plugs into, quite happy to bung £10 or so into the pot for that.
Andy
Andy
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




