Furniture Making Courses
Discussion
After 23 years in IT Sales and Marketing, and after finding out last week that I will have no job by July, I've decided to radically change my life and become a furniture maker. Sometimes you need to be pushed out of your comfort zone to follow your dreams!
I've found a few furniture making schools in the South (Somerset, Kent, 2 in Devon and 2 in E Sussex) and I'm hoping to visit these over the next month or 2 to work out the one for me.
So the question - is anyone on here a furniture maker/cabinet maker and are there any schools you would recommend based on your knowledge.
Thanks
Gary
I've found a few furniture making schools in the South (Somerset, Kent, 2 in Devon and 2 in E Sussex) and I'm hoping to visit these over the next month or 2 to work out the one for me.
So the question - is anyone on here a furniture maker/cabinet maker and are there any schools you would recommend based on your knowledge.
Thanks
Gary
For furniture I would recommend the High Wycombe area. A real tradition of furniture making and also current furniture makers as well. e.g. Ercol. http://bucks.ac.uk/default.aspx?page=230
I know some people who used to work at Ercol, they may have contacts there, if you're interested..
I know some people who used to work at Ercol, they may have contacts there, if you're interested..
Being a furniture maker can be a great pastime. As long as you don't expect to make any money at it you will be OK. Anybody who tells you that it is possible to make money, making furniture, in this country is at best not telling you all the truth, and at worst a downright liar.
The simple truth is that people are not wiling to pay the kind of price that would be needed to cover the cost of producing the item, and some money for you on top.
In many cases furniture can be bought for less that the materials would cost in this country.
One good thing about furniture making is that your start up money is less than in many other businesses, and will last a bit longer before it is all gone too. As a way of making money, though, forget it.
The simple truth is that people are not wiling to pay the kind of price that would be needed to cover the cost of producing the item, and some money for you on top.
In many cases furniture can be bought for less that the materials would cost in this country.
One good thing about furniture making is that your start up money is less than in many other businesses, and will last a bit longer before it is all gone too. As a way of making money, though, forget it.
singlecoil said:
Being a furniture maker can be a great pastime. As long as you don't expect to make any money at it you will be OK. Anybody who tells you that it is possible to make money, making furniture, in this country is at best not telling you all the truth, and at worst a downright liar.
The simple truth is that people are not wiling to pay the kind of price that would be needed to cover the cost of producing the item, and some money for you on top.
In many cases furniture can be bought for less that the materials would cost in this country.
One good thing about furniture making is that your start up money is less than in many other businesses, and will last a bit longer before it is all gone too. As a way of making money, though, forget it.
I thank you for your honest, if downbeat, opinion The simple truth is that people are not wiling to pay the kind of price that would be needed to cover the cost of producing the item, and some money for you on top.
In many cases furniture can be bought for less that the materials would cost in this country.
One good thing about furniture making is that your start up money is less than in many other businesses, and will last a bit longer before it is all gone too. As a way of making money, though, forget it.

Depends what you mean by making money. I want to do this as a vocation as I've spent the last 23 years earning good money with no satisfaction at all. I will therefore be able to make money - maybe not much though! That, as they say, suits me

ginettag27 said:
For furniture I would recommend the High Wycombe area. A real tradition of furniture making and also current furniture makers as well. e.g. Ercol. http://bucks.ac.uk/default.aspx?page=230
I know some people who used to work at Ercol, they may have contacts there, if you're interested..
Thanks for that. I've actually narrowed down to 2 places now - one in Sussex and one in Somerset working with a furniture maker on a one year course. That Uni course looks good but I want to do it more intensely with 1:1 tuition rather than a degree course.I know some people who used to work at Ercol, they may have contacts there, if you're interested..
garyhun said:
I thank you for your honest, if downbeat, opinion 
Depends what you mean by making money. I want to do this as a vocation as I've spent the last 23 years earning good money with no satisfaction at all. I will therefore be able to make money - maybe not much though! That, as they say, suits me
If by making 'not much' money you mean losing it, then true. If you mean making a little bit more money that it actually costs you to make the furniture, then I will say so unlikely as to not be worth consideration.
Depends what you mean by making money. I want to do this as a vocation as I've spent the last 23 years earning good money with no satisfaction at all. I will therefore be able to make money - maybe not much though! That, as they say, suits me

Try this as a thought experiment-
Let's suppose you are commissioned to make a table and six chairs.
Let's suppose that you have found a customer who actually knows the difference between veneered panel products and solid wood (I assume you are not going to work in panel products which really do need a factory environment with cnc machnes etc to be feasible).
Have a look in a wodworking magazine and get some prices for the appropriate amount of kiln dried timber, then consider that you are going to have to keep it in a warm, dry environment for a couple of months before it is safe to use. Have a think about how long it would take you to make a decent sized table, then finish it with suitably heat resistant materials.
The table was the easy bit. The chairs are going to be quite a bit more difficult. Many chair components are curved and angled. You will either need a lot of time or some clever machinery to make them.
I would be impressed if I saw a bloke on his own in a traditional workshop turn out a table and six chairs, with the chairs upholstered and the whole lot finished in less than 3 months.
Hopefully you will not be paying rent on a workshop, but will have your own building in your back garden, and neighbours who won't mind the noise or the fact that you are running a business. If you are renting, then I reckon you will pay out more in rent, rates insurance and heating alone than you will take in turnover, let alone the marketing costs which will have to include some kind of showroom, unless you are that good that you can sell from photos and sketches.
You might be able to guess that I have been involved in furniture making in one way or another over the years, and have seen the situation get steadily worse. That's understandable, furniture is a commodity, and whoever can make it the cheapest (At whatever quality level) is entitled to get the sale. This is before the recent economic downturn.
What I do hate, though, are the people who, in trying to attract students such as yourself, will suggest that it is possible to make money, when in fact it isn't (unless you own a factory in Eastern Europe or the far east). Even David Savage went bust, and he was actually running a woodworking school with a number of students. Best way to make money furniture making is to start teaching it, which is why there are so many people doing exactly that.
singlecoil said:
garyhun said:
I thank you for your honest, if downbeat, opinion 
Depends what you mean by making money. I want to do this as a vocation as I've spent the last 23 years earning good money with no satisfaction at all. I will therefore be able to make money - maybe not much though! That, as they say, suits me
If by making 'not much' money you mean losing it, then true. If you mean making a little bit more money that it actually costs you to make the furniture, then I will say so unlikely as to not be worth consideration.
Depends what you mean by making money. I want to do this as a vocation as I've spent the last 23 years earning good money with no satisfaction at all. I will therefore be able to make money - maybe not much though! That, as they say, suits me

Try this as a thought experiment-
Let's suppose you are commissioned to make a table and six chairs.
Let's suppose that you have found a customer who actually knows the difference between veneered panel products and solid wood (I assume you are not going to work in panel products which really do need a factory environment with cnc machnes etc to be feasible).
Have a look in a wodworking magazine and get some prices for the appropriate amount of kiln dried timber, then consider that you are going to have to keep it in a warm, dry environment for a couple of months before it is safe to use. Have a think about how long it would take you to make a decent sized table, then finish it with suitably heat resistant materials.
The table was the easy bit. The chairs are going to be quite a bit more difficult. Many chair components are curved and angled. You will either need a lot of time or some clever machinery to make them.
I would be impressed if I saw a bloke on his own in a traditional workshop turn out a table and six chairs, with the chairs upholstered and the whole lot finished in less than 3 months.
Hopefully you will not be paying rent on a workshop, but will have your own building in your back garden, and neighbours who won't mind the noise or the fact that you are running a business. If you are renting, then I reckon you will pay out more in rent, rates insurance and heating alone than you will take in turnover, let alone the marketing costs which will have to include some kind of showroom, unless you are that good that you can sell from photos and sketches.
You might be able to guess that I have been involved in furniture making in one way or another over the years, and have seen the situation get steadily worse. That's understandable, furniture is a commodity, and whoever can make it the cheapest (At whatever quality level) is entitled to get the sale. This is before the recent economic downturn.
What I do hate, though, are the people who, in trying to attract students such as yourself, will suggest that it is possible to make money, when in fact it isn't (unless you own a factory in Eastern Europe or the far east). Even David Savage went bust, and he was actually running a woodworking school with a number of students. Best way to make money furniture making is to start teaching it, which is why there are so many people doing exactly that.
Even an extraction unit (inside a building, never mind outside) requires planning permission. Woodworking machinery will bite even the most experienced users who get a bit tired/rushed/distracted. Be prepared for a trip to casualty if you're using spindle moulders/planers/saws/dim saws, routers all day every day. Dust masks, hearing protection, eye protection.
Dealing with some people who buy bespoke furniture can be 'interesting' if not somewhat challenging - they tend to be serial letter writers.
I've seen workshops with some lovely pieces just gathering dust. Cancelled orders, wrong colour, timber drying cracks in a centrally heated house - added character doesn't cut it with some people.
Nice hobby, but making a living? I pulled most of the CNC machines out of a well known furniture maker on the north circular and they knew how to make nice furniture very quickly. Watch the new yankee workshop series if you can find it - he made some nice kit, including a lovely sailing dinghy - that's what I'd choose to build.
Here you go - a lesson from the man himself
http://www.youtube.com/watch?v=DF14UmhMPEY

Dealing with some people who buy bespoke furniture can be 'interesting' if not somewhat challenging - they tend to be serial letter writers.
I've seen workshops with some lovely pieces just gathering dust. Cancelled orders, wrong colour, timber drying cracks in a centrally heated house - added character doesn't cut it with some people.
Nice hobby, but making a living? I pulled most of the CNC machines out of a well known furniture maker on the north circular and they knew how to make nice furniture very quickly. Watch the new yankee workshop series if you can find it - he made some nice kit, including a lovely sailing dinghy - that's what I'd choose to build.
Here you go - a lesson from the man himself
http://www.youtube.com/watch?v=DF14UmhMPEY

Edited by dfen5 on Wednesday 11th March 23:13
God, there are some miserable people on here
Seriously though, I appreciate the feedback and my eyes are firmly open. I'm fortunate that I do not need to earn for a few years so am able to do this without the need to make it a career move and as I always say, "Sometimes you have to follow your heart" 
Seriously though, I appreciate the feedback and my eyes are firmly open. I'm fortunate that I do not need to earn for a few years so am able to do this without the need to make it a career move and as I always say, "Sometimes you have to follow your heart" 
Edited by anonymous-user on Thursday 12th March 08:53
dfen5 said:
Even an extraction unit (inside a building, never mind outside) requires planning permission. Woodworking machinery will bite even the most experienced users who get a bit tired/rushed/distracted. Be prepared for a trip to casualty if you're using spindle moulders/planers/saws/dim saws, routers all day every day. Dust masks, hearing protection, eye protection.
Dealing with some people who buy bespoke furniture can be 'interesting' if not somewhat challenging - they tend to be serial letter writers.
I've seen workshops with some lovely pieces just gathering dust. Cancelled orders, wrong colour, timber drying cracks in a centrally heated house - added character doesn't cut it with some people.
Nice hobby, but making a living? I pulled most of the CNC machines out of a well known furniture maker on the north circular and they knew how to make nice furniture very quickly. Watch the new yankee workshop series if you can find it - he made some nice kit, including a lovely sailing dinghy - that's what I'd choose to build.
Here you go - a lesson from the man himself
http://www.youtube.com/watch?v=DF14UmhMPEY

I obviously need thick glasses Dealing with some people who buy bespoke furniture can be 'interesting' if not somewhat challenging - they tend to be serial letter writers.
I've seen workshops with some lovely pieces just gathering dust. Cancelled orders, wrong colour, timber drying cracks in a centrally heated house - added character doesn't cut it with some people.
Nice hobby, but making a living? I pulled most of the CNC machines out of a well known furniture maker on the north circular and they knew how to make nice furniture very quickly. Watch the new yankee workshop series if you can find it - he made some nice kit, including a lovely sailing dinghy - that's what I'd choose to build.
Here you go - a lesson from the man himself
http://www.youtube.com/watch?v=DF14UmhMPEY

Edited by dfen5 on Wednesday 11th March 23:13

Tomorrows antiques wont be found in a flat pack furniture box. Even a half decent reclaimed wood dining table will set you back £1200.
The point is-I believe there are people out there who are still prepared to pay decent money for decent furniture. Dont aim for the MFIKEA briggade and good luck to you Gary. Oh and dont be put off by the doom merchants who say you cant do it.
The point is-I believe there are people out there who are still prepared to pay decent money for decent furniture. Dont aim for the MFIKEA briggade and good luck to you Gary. Oh and dont be put off by the doom merchants who say you cant do it.
Well I have a cabinet making business and provided you make outstanding furniture and you know how to run a decent business then it's possible to make money.
The one thing I would say is if you want to spend 4 weeks making a table with hand planes then you are going to struggle, a table is 1 or 2 days work max, the bed in my website is 7 days work, speed is everything and this only comes from experience.
I make all sorts from freestanding furniture to fitted bespoke kitchens, I cannot compete with high street prices therefore my furniture has to stand out from the crowd. like the table in my site.
Most furniture making courses these days are aimed at the hobbiest, my criteria for employing people is previous experience and a trial basis to see how competant they are.
Please feel free to contact me if you want more advice
The one thing I would say is if you want to spend 4 weeks making a table with hand planes then you are going to struggle, a table is 1 or 2 days work max, the bed in my website is 7 days work, speed is everything and this only comes from experience.
I make all sorts from freestanding furniture to fitted bespoke kitchens, I cannot compete with high street prices therefore my furniture has to stand out from the crowd. like the table in my site.
Most furniture making courses these days are aimed at the hobbiest, my criteria for employing people is previous experience and a trial basis to see how competant they are.
Please feel free to contact me if you want more advice
Edited by mechsympathy on Thursday 9th April 10:49
One other point, its hard graft, my back is knackered and I am now moving more into the office than shop floor.
At 43 I struggle to lift heavy pieces and panels, hence I have employees to help with the making.
Having said all that, I wouldn't swap places with many people, its a nice job and people are genuinely impressed when you say your a cabinetmaker, sort of nice skill to have.
At 43 I struggle to lift heavy pieces and panels, hence I have employees to help with the making.
Having said all that, I wouldn't swap places with many people, its a nice job and people are genuinely impressed when you say your a cabinetmaker, sort of nice skill to have.
Edited by mechsympathy on Thursday 9th April 10:49
People do still want nice furniture, my parents company has only just slowed down in the last couple of weeks, we dont sell creeky tat. We sell quality interior furnishing, we dont try and compete with ikea/dfs, because we only sell quality! Our sofa frames(made in the uk)have a 30 year guaranteee! People will spend the money on furniture providing, firstly they know you exist, and secondly, you build items to a very high standard.
Hope you enjoy your new venture!
Lew
Hope you enjoy your new venture!
Lew
Gassing Station | Business | Top of Page | What's New | My Stuff


