Engine cut-out when fan starts
Discussion
Hi there,
I've just returned from a 500 mile round trip to Cornwall, unfortunately the last 10 miles by bus due to my chim 500 cutting out! 2 problems both which appeared on the return journey today - 2 in one day is not much fun, the first clearly more of a pressing issue!
1. When the fan kicks in, a few secs later the engine completely cuts out. The fan starts at about the right place (80/85 deg) but never before has resulted in the engine being cut-off. Help! Any ideas?
2. Less of an immediate issue but still another problem that started today - drivers door does not shut and just bounces back open clearly not latching. Will shut if I press the lock button in the middle console but under-mirror button also doesn't work Reckon its an electrical thing as the button is not activating anything in the door. Ideas?
Its a '99 Chim 500. I'm not very good at this so detailed help would be greatly appreciated!!
Cheers.
I've just returned from a 500 mile round trip to Cornwall, unfortunately the last 10 miles by bus due to my chim 500 cutting out! 2 problems both which appeared on the return journey today - 2 in one day is not much fun, the first clearly more of a pressing issue!
1. When the fan kicks in, a few secs later the engine completely cuts out. The fan starts at about the right place (80/85 deg) but never before has resulted in the engine being cut-off. Help! Any ideas?
2. Less of an immediate issue but still another problem that started today - drivers door does not shut and just bounces back open clearly not latching. Will shut if I press the lock button in the middle console but under-mirror button also doesn't work Reckon its an electrical thing as the button is not activating anything in the door. Ideas?
Its a '99 Chim 500. I'm not very good at this so detailed help would be greatly appreciated!!
Cheers.
Maybe worth checking the earths and also is the alternator charging i.e.14 volts at the battery.
Does the same occur if you switch the head lights on. Any heavy electrical drain may cause this
to check that its not engine temp related you could always strap the 2 connectors on the otter switch together to turn the fans on whilst the engine is cold. If you havent and fan override switch.
The door issue is fairly common and I just lift the carpet flap back behind the door pillar and spray with WD40 and it usually fixes it
Woo5ie
Does the same occur if you switch the head lights on. Any heavy electrical drain may cause this
to check that its not engine temp related you could always strap the 2 connectors on the otter switch together to turn the fans on whilst the engine is cold. If you havent and fan override switch.
The door issue is fairly common and I just lift the carpet flap back behind the door pillar and spray with WD40 and it usually fixes it
Woo5ie
Both issues resolved.
Fan was indeed a bad earth problem, earth point in engine bay infront of the drivers footwell was v grubby so removed, cleaned up and all working fine now.
Door problem was that the solenoid/servo got stuck in the open position (the one that pings the door open using the undermirror button), forced it shut and WD40'd it but think its actually a malfunction of the solenoid as it keeps happening so prob going to replace it.
Thanks for the postings, v helpful.
Fan was indeed a bad earth problem, earth point in engine bay infront of the drivers footwell was v grubby so removed, cleaned up and all working fine now.
Door problem was that the solenoid/servo got stuck in the open position (the one that pings the door open using the undermirror button), forced it shut and WD40'd it but think its actually a malfunction of the solenoid as it keeps happening so prob going to replace it.
Thanks for the postings, v helpful.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


