Speedo and MoT
Discussion
spend said:
Could be a moot point these days J, a lot of the MOT stations have instruction to test the brakes with Tapley meters because of the diffs.. They may well notice the speedo isn't working in that case?
You're quoted as being a retired nit picker. OK, the MoT test is being made stricter in many areas and I should perhaps revise my opinion.(PS Good luck with the engine from Mike! Looks very good.)
The speedo itself works - ie it will read the correct speed whilst driving along.
It should the mileage as 0 though. During a drive it will increment from 0, but as soon as the ignition is turned off, it resets back to 0. I'm having to keep a tally of the distances i drive so that i know the correct mileage!!!
More specific question then is do i need a working mileometer (sp?) to pass an MoT?
It should the mileage as 0 though. During a drive it will increment from 0, but as soon as the ignition is turned off, it resets back to 0. I'm having to keep a tally of the distances i drive so that i know the correct mileage!!!
More specific question then is do i need a working mileometer (sp?) to pass an MoT?
I wasn't sure J, my MOT'er lets me do the brake test (the driving bit) but if they do it themselves, I just don't know? Certainly a bit of a grey area
wasn't a yay/nay comment just an observation..
Mikes doing a cracking job as usual, having to relieve the pistons further is still making me giggle a bit. Nit picking experience sometimes has its benefits
wasn't a yay/nay comment just an observation..Mikes doing a cracking job as usual, having to relieve the pistons further is still making me giggle a bit. Nit picking experience sometimes has its benefits

you don't need a working mileometer for an MOT to my knowledge. If you are not bothered about having the LCD displaying the correct total mileage you can take your own speedo apart in the same time it would take to package it up and post it.
Entry method - hacksaw a slot across the back of the bezel (the bit that is bent over the lip on the speedo casing) to thin the metal - do it the bottom so you will not see any sign of bezel damage once back in the car. Use a sharp electrical screwdriver to prise up the thin bit of bezel. work around the rim until about 2/3 done. slip the bezel off. Undo the screws/nuts on the back of the unit to release the mechanism from the casing - you will see the battery just slides under the contacts. Tesco stocks the replacement cells for a couple of quid or screwfix do them too. Replace cell, clean inside of glass/inside of casing etc, replace bezel, push back round the lip, sand down the damaged paint areas, mask, spray with satin black from halfrauds or poundstore/wilkos. job done in an hour and a bit.
cheers
schmo
Entry method - hacksaw a slot across the back of the bezel (the bit that is bent over the lip on the speedo casing) to thin the metal - do it the bottom so you will not see any sign of bezel damage once back in the car. Use a sharp electrical screwdriver to prise up the thin bit of bezel. work around the rim until about 2/3 done. slip the bezel off. Undo the screws/nuts on the back of the unit to release the mechanism from the casing - you will see the battery just slides under the contacts. Tesco stocks the replacement cells for a couple of quid or screwfix do them too. Replace cell, clean inside of glass/inside of casing etc, replace bezel, push back round the lip, sand down the damaged paint areas, mask, spray with satin black from halfrauds or poundstore/wilkos. job done in an hour and a bit.
cheers
schmo
I've just sent mine off to ETB with exactly the same problem, they have quoted me about a 2 week turnaround which I hope they stick to as mines booked in for an MOT in early April.
Agree that it's not exactly rocket science to fix it but the advantage of getting the pros to do it is they can reset the mileage back to the original figure (if you send them MOT proof of the current (ish) mileage).
No reason it wouldn't pass an MOT with it reading '0' but unless you had a very understanding MOT tester you'd have a reading of '0' on the MOT which just makes things a bit messy in your service history file when it comes to selling time.
Agree that it's not exactly rocket science to fix it but the advantage of getting the pros to do it is they can reset the mileage back to the original figure (if you send them MOT proof of the current (ish) mileage).

No reason it wouldn't pass an MOT with it reading '0' but unless you had a very understanding MOT tester you'd have a reading of '0' on the MOT which just makes things a bit messy in your service history file when it comes to selling time.

Thanks for everyones replies. Don't fancy taking it apart myself so I'll send it off after the mot. Will provide as much proof of mileage as I can and hope they put the correct (ish) figure on the certificate. Won't be too bothered if they don't. I'll be keeping the car for many many more years yet and I log every expense on my blog with a current mileage
Thanks again
James
Thanks again
James
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




