correct wiring position
Discussion
I used to stick the gubbins in rubber gloves
, keeps dry & insulated. If you open the ECU you can drill out the pop rivets and get rid of the LR mounting bracket, which makes it easier to wedge down the side of the battery (if its floor mounted
). If you want to go the whole hog relay & fuse holders are not expensive, then you can fix the flying loom to the bottom of the dash / behind the glove panel..
An awful lot of the excess loom has to be carefully stuffed up the inner wing / transmission tunnel area.
, keeps dry & insulated. If you open the ECU you can drill out the pop rivets and get rid of the LR mounting bracket, which makes it easier to wedge down the side of the battery (if its floor mounted
). If you want to go the whole hog relay & fuse holders are not expensive, then you can fix the flying loom to the bottom of the dash / behind the glove panel..An awful lot of the excess loom has to be carefully stuffed up the inner wing / transmission tunnel area.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


