Changing front indicator lenses - anyone done this b4?..
Changing front indicator lenses - anyone done this b4?..
Author
Discussion

stuboy 500

Original Poster:

36 posts

213 months

Thursday 19th March 2009
quotequote all
Changing front indicator lenses - anyone done this b4?..

Got some clear lenses to go in my '98 Chim, so newer style body. Anyone tell me the easiest way to do this job. Had a quick look and seems tight to get too the lens holder and initially I cant really see whats holding them in place on the body.

Thanks if you can help...

Stu

PurpleV8

137 posts

247 months

Thursday 19th March 2009
quotequote all
Lenses are glued to the body from the inside with the bulb holder screwed onto the back of the lens. They can usually be removed with a good push from the front, pushing the lens back into the inner wing. If really stuck firm you may need to use a knife on the inside to cut through the silkaflex that was used to fix them in place.

sonnylad

1,165 posts

256 months

Thursday 19th March 2009
quotequote all
Yep basicly as stated above but would try and cut and remove as much as possible of the old silkaflex.

And on refixing the new ones let the lense fully bond to the body before attaching the lamp holder part.

Russ