Anyone Carb'd a Chimaera?
Discussion
Just wondering if anyone has conevrted a Chimaera to carburettor? Just curious as the plenum chamber looks restrictive and seems quite hard to mod cheaply, it would seem to be an easy conversion with edelbrock carb and manifolds only 600 odd quid, then all needed would be something like megajolt to control the ignition side of things and change the fuel pump. just wondering if any power could be had, also if it sounded any better.
Ivan
Ivan
byd1380 said:
Just wondering if anyone has conevrted a Chimaera to carburettor? Just curious as the plenum chamber looks restrictive and seems quite hard to mod cheaply, it would seem to be an easy conversion with edelbrock carb and manifolds only 600 odd quid, then all needed would be something like megajolt to control the ignition side of things and change the fuel pump. just wondering if any power could be had, also if it sounded any better.
Ivan
There was a guy who put a carb on Griffith 500, think he is called ApacheIvan
daz the plumber said:
why do the americans stick with carbs on there v8`s? they produce 500 bhp plus and even stick a supercharger on with a carb stuck on the end .!
Carbs are limited in so much as they can't vary the fuel air mix throughout the rev range in the same way that a well mapped EFI system can. Yes you can get variable venturi carbs and twin venturi's which will give you a two stage fueling but nothing like what an adaptive map EFI can offer. If you're building a racer, then you can sacrifice road manners at lower rpms for optimum fueling in the power band.
Although they do make nice noises .
http://www.youtube.com/watch?v=wirvif4Q-Yw
twin 50's i think.
Can this man pedal a car !!!!
http://www.youtube.com/watch?v=wirvif4Q-Yw
twin 50's i think.
Can this man pedal a car !!!!
Cheers for all the replys, I know fuel injetion would be better overall(I have a 4age 20Valve MG midget with ITB's and stanalone ECU). But just thought for getting a better performance for your money, carbs would maybe offer extra HP due to better/more direct air flow into the engine as opposed to everthing flowing through a 71mm plenum. I think once the fueling is set, you don'r really adjust it, the power tends to be in the timing side of things, plus if it made the right induction roar, it would be worth the change.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



TB's are the best of both worlds