Alarm keeps going off
Discussion
Just put the cover on the Chim, locked it up, and the alarm has gone off 3 times in the last hour. It has been very windy but i don't know if this has any bearing on it? Is there any way to make the alarm 'less sensitive' so that it doesnt keep doing this, or is there another problem?
Is there a knack of disarming the immobiliser when the alarm is already off?
For example if you're washing car or whatever and have the car unlocked, the immobiliser will reset if the ignition isn't on after a short while - which is fine.
However, if I then chose to start car, if I press the left pad on the fob (which unlocks it) why does it reset the alarm regardless instead of just disarming the immobiliser?
Does that make sense?
For example if you're washing car or whatever and have the car unlocked, the immobiliser will reset if the ignition isn't on after a short while - which is fine.
However, if I then chose to start car, if I press the left pad on the fob (which unlocks it) why does it reset the alarm regardless instead of just disarming the immobiliser?
Does that make sense?
give Carl Baker a ring, http://www.tvruk.tv/
I had exactly the same problem a while ago, Carl told me over thephone how to set the sensitivity on the alarm, very easy to do, and Carl is a very helpfull bloke.
I had exactly the same problem a while ago, Carl told me over thephone how to set the sensitivity on the alarm, very easy to do, and Carl is a very helpfull bloke.

CCM said:
Is there a knack of disarming the immobiliser when the alarm is already off?
For example if you're washing car or whatever and have the car unlocked, the immobiliser will reset if the ignition isn't on after a short while - which is fine.
However, if I then chose to start car, if I press the left pad on the fob (which unlocks it) why does it reset the alarm regardless instead of just disarming the immobiliser?
Does that make sense?
Do you have the key turned halfway in the ignition when you do this? If not then that may be your problem. Without the ignition switched on to the 2nd position then the fob will set the alarm.For example if you're washing car or whatever and have the car unlocked, the immobiliser will reset if the ignition isn't on after a short while - which is fine.
However, if I then chose to start car, if I press the left pad on the fob (which unlocks it) why does it reset the alarm regardless instead of just disarming the immobiliser?
Does that make sense?
Sorry to hijack the thread but one little question. When the alarm goes off what exactly is the alert? When messing around in the car I believe I have set off the alarm on two separate occasions but all that happens is that the hazards flash, no siren. There is one fitted in front of the radiator but I assume that for some reason It's not working.
locodude said:
Sorry to hijack the thread but one little question. When the alarm goes off what exactly is the alert? When messing around in the car I believe I have set off the alarm on two separate occasions but all that happens is that the hazards flash, no siren. There is one fitted in front of the radiator but I assume that for some reason It's not working.
The siren has its own internal battery and it's possible this has gone, else they are very vulnerable to water damage. I presume you've checked it is connected OK?Sounds like its dead though as the siren is pretty deafening.
Zippee said:
CCM said:
Is there a knack of disarming the immobiliser when the alarm is already off?
For example if you're washing car or whatever and have the car unlocked, the immobiliser will reset if the ignition isn't on after a short while - which is fine.
However, if I then chose to start car, if I press the left pad on the fob (which unlocks it) why does it reset the alarm regardless instead of just disarming the immobiliser?
Does that make sense?
Do you have the key turned halfway in the ignition when you do this? If not then that may be your problem. Without the ignition switched on to the 2nd position then the fob will set the alarm.For example if you're washing car or whatever and have the car unlocked, the immobiliser will reset if the ignition isn't on after a short while - which is fine.
However, if I then chose to start car, if I press the left pad on the fob (which unlocks it) why does it reset the alarm regardless instead of just disarming the immobiliser?
Does that make sense?

I will go try this shortly when we go for a run out.
Zippee said:
The siren has its own internal battery and it's possible this has gone, else they are very vulnerable to water damage. I presume you've checked it is connected OK?
Sounds like its dead though as the siren is pretty deafening.
It's connected up ok, must be dead. I'll take it off at some point and have a good look at it, cheers.Sounds like its dead though as the siren is pretty deafening.
jr6yam said:
I had my alarm sorted by jem rolfe,he's a good bloke
and local (tewin)
jem@jemrolfe.co.uk
BTW apart from heavy fuel usage were there any other
symptoms from your kinked petrol pipe?
john
Not in the running or anything like that, it is still perfect. It has confused me somewhat, as i was a bit sceptical at this being the cause. It just seems to have been a miracle cure to the problem as that was the only thing that was changed. and local (tewin)
jem@jemrolfe.co.uk
BTW apart from heavy fuel usage were there any other
symptoms from your kinked petrol pipe?
john
But to answer your question, the fuel economy was the only symptom
lewis_sharman said:
Just put the cover on the Chim, locked it up, and the alarm has gone off 3 times in the last hour. It has been very windy but i don't know if this has any bearing on it? Is there any way to make the alarm 'less sensitive' so that it doesnt keep doing this, or is there another problem?
Hi LewisYou may already have the answer to this but when windy or you have the roof down and want to lock the car you can stop the internal movement sensor activating by pressing the key fob down for a longer period than usual. The flashers then flash 4 times instead of three to confirm what you have done. Imobiliser and central locking activate as usual. I use this facility quite a lot
Trev
WOO5IE said:
lewis_sharman said:
Just put the cover on the Chim, locked it up, and the alarm has gone off 3 times in the last hour. It has been very windy but i don't know if this has any bearing on it? Is there any way to make the alarm 'less sensitive' so that it doesnt keep doing this, or is there another problem?
Hi LewisYou may already have the answer to this but when windy or you have the roof down and want to lock the car you can stop the internal movement sensor activating by pressing the key fob down for a longer period than usual. The flashers then flash 4 times instead of three to confirm what you have done. Imobiliser and central locking activate as usual. I use this facility quite a lot
Trev
Ive been in Paris all weekend and apparently the alarm hasnt gone off in my absence, so i will not worry about it for the moment (bigger fish to fry)
If it happens again i will look into all these possible causes. Thanks for all your help!
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



