Removing door mirrors
Discussion
I found it impossible to remove the rabbit ears in one piece: They swivel on a ball joint, whose plastic socket is glassed into the door. You can swivel the joint out of its socket, and the remains of the socket can be broken away, then the the edges can be ground down using a dremel. I used MX5 mirrors which completely cover the remains of the socket.
BTW, the rabbit ears look similar to the mirrors on a Ferrari 308/328. There's possibly huge money to be made by selling them to a 'rari owner
BTW, the rabbit ears look similar to the mirrors on a Ferrari 308/328. There's possibly huge money to be made by selling them to a 'rari owner

The mirror is a ball and socket affair, spray with wd40 and move it around so it is fairly loose then apply a bit of pressure and it should slide off the ball. The part that is attached to the door is held on by the two screws and possibly a bit of sealant, if you apply a bit of pressure it should push into the door cavity. You may be able to retreve it by just removing the speaker and having a grope around inside the door.
Tony
Tony
Just had a look under the flex and there seem to be two small screws on the outside of the stalk.
Will have a go removing the mirrors tomorrow.
So WD40 on the ball joint and pull the mirror body off.
Then remove the speakers to gain access.
Take the small screws out and work the stalk free of what ever is sticking it. Hope Sikoflex wasn't around in 1990.
Will have a go removing the mirrors tomorrow.
So WD40 on the ball joint and pull the mirror body off.
Then remove the speakers to gain access.
Take the small screws out and work the stalk free of what ever is sticking it. Hope Sikoflex wasn't around in 1990.
Got the mirrors on now 
A bit of twisting and a tap with a hammer and the stalks drop into the door, if the steel ball is still in its a bit tight past the window.

Bridged the hole on the inside with glass matt, topped up with P40
Before -

After -


A bit of twisting and a tap with a hammer and the stalks drop into the door, if the steel ball is still in its a bit tight past the window.

Bridged the hole on the inside with glass matt, topped up with P40
Before -

After -

Edited by Wiz on Monday 30th March 15:32
Edited by Wiz on Monday 30th March 15:34
Hi Olav... long time no see...
You might want to consider these instead...
http://cgi.ebay.co.uk/escort-mk2-fiesta-mk1-brand-...
he's listing the other side seperately..
http://cgi.ebay.co.uk/escort-mk2-fiesta-mk1-brand-...
these are like Wiz's above...
are you visiting the UK this year ?
K
You might want to consider these instead...
http://cgi.ebay.co.uk/escort-mk2-fiesta-mk1-brand-...
he's listing the other side seperately..
http://cgi.ebay.co.uk/escort-mk2-fiesta-mk1-brand-...
these are like Wiz's above...
are you visiting the UK this year ?
K

Hallo all,
Long time no see: yes that's right!! I am back! :-) :-)
Yep...I know...but....I....bought them a while ago. The Citroen type mirror's.
SO THEY HAVE TO GO ON!!! YES I'M SHOUTING :-)
I am afraid I will have to recreate the circular recess.
Cheers
Olav
Long time no see: yes that's right!! I am back! :-) :-)
Yep...I know...but....I....bought them a while ago. The Citroen type mirror's.
SO THEY HAVE TO GO ON!!! YES I'M SHOUTING :-)
I am afraid I will have to recreate the circular recess.
Cheers
Olav
Edited by Olav Bergman on Friday 3rd April 15:14
Edited by Olav Bergman on Friday 3rd April 15:27
Gassing Station | S Series | Top of Page | What's New | My Stuff






