Chimaera Spyder Conversion
Discussion
Hello again... I have a few problems falling in love with my 98' 500 Chim's Griff-Wheels....
But I really fell in love with that "Spider-Conversion" (Tuscan Wheels 18')
http://www.pistonheads.com/sales/914421.htm
What do I need, and where do I get it from?
But I really fell in love with that "Spider-Conversion" (Tuscan Wheels 18')
http://www.pistonheads.com/sales/914421.htm
What do I need, and where do I get it from?
18" Spiders will make your car handle like a pig. Snap over steer, bump steer, rim bump, you name it. Go for Spiders but fit 16" all round if you want it to look good and drive like it should. I was fortunate enough to get the last factory kit. The major benefits are the ability to fit better front brakes and rims that allow more choice of tyre.
spend said:
Now now Bob... Who are we to dispute this myth of bigger is better 

I just like to wind up the natives 

I suppose it does depend what you use your car for. If like me you spend most of your time on the B roads then what I say is true. If it's motorway miles and track use then 18" wheels will probably work fine.I'm not sure I agree with the comments about the steering problems... Then again I'm no expert. But I run with 17's on the front and 18 rears on my Chim with 40 profile tyres and I have to say I've never had any sort of problem with the steering whatsoever be it A/B roads, motorway or race track. What exactly are 18's supposed to do to the handling? Because if anything I'd say my handling improved with the larger wheels.
The only reason I'd avoid a Spyder conversion is that they are made from poor quality alloy and are not heat treated and therefore can be very easy to damage. Having said that, I believe Rimstock do Spyders (though not called spyders) which are made from stronger stuff and are heat treated. At least they did last year. Might be worth giving them a call!
The only reason I'd avoid a Spyder conversion is that they are made from poor quality alloy and are not heat treated and therefore can be very easy to damage. Having said that, I believe Rimstock do Spyders (though not called spyders) which are made from stronger stuff and are heat treated. At least they did last year. Might be worth giving them a call!
450Nick said:
I'm not sure I agree with the comments about the steering problems... Then again I'm no expert. But I run with 17's on the front and 18 rears
That'll be fine, it's the fronts running very low profile where most of the issues are. No problem with 17's. The 18's at the rear will decrease the progressiveness of oversteer but if you don't push corners too hard it shouldn't be a problem. If you do end up in oversteer it will occur with less feedback giving you less time to correct it.People address 18" front wheel rim bump by increasing the tyre pressure, that's got to be wrong.
bobfather said:
450Nick said:
I'm not sure I agree with the comments about the steering problems... Then again I'm no expert. But I run with 17's on the front and 18 rears
That'll be fine, it's the fronts running very low profile where most of the issues are. No problem with 17's. The 18's at the rear will decrease the progressiveness of oversteer but if you don't push corners too hard it shouldn't be a problem. If you do end up in oversteer it will occur with less feedback giving you less time to correct it.People address 18" front wheel rim bump by increasing the tyre pressure, that's got to be wrong.
Having said that, for track wheels this year I have got hold of another set of Imolas so will be running 16 Imolas front and rear with 225 Toyo R888's at the front and 245 R888's at the rear on the track. I'll be quite interested to see what this does to the car both grip wise and to the limit handling.
450Nick said:
Having said that, for track wheels this year I have got hold of another set of Imolas so will be running 16 Imolas front and rear with 225 Toyo R888's at the front and 245 R888's at the rear on the track. I'll be quite interested to see what this does to the car both grip wise and to the limit handling.
Toyo R888 at 245 16". Where did you find them. The Toyo website doesn't quote them. I'd love to fit a set of those to my trackday rearsbobfather said:
450Nick said:
Having said that, for track wheels this year I have got hold of another set of Imolas so will be running 16 Imolas front and rear with 225 Toyo R888's at the front and 245 R888's at the rear on the track. I'll be quite interested to see what this does to the car both grip wise and to the limit handling.
Toyo R888 at 245 16". Where did you find them. The Toyo website doesn't quote them. I'd love to fit a set of those to my trackday rearsbobfather said:
450Nick said:
Having said that, for track wheels this year I have got hold of another set of Imolas so will be running 16 Imolas front and rear with 225 Toyo R888's at the front and 245 R888's at the rear on the track. I'll be quite interested to see what this does to the car both grip wise and to the limit handling.
Toyo R888 at 245 16". Where did you find them. The Toyo website doesn't quote them. I'd love to fit a set of those to my trackday rearsHave you compared 16" and 18" spiders in use?
Suffice it to say I sold my 18" spiders, I found they didn't perform as well as the 16" and TBH I didn't think they looked any better? Luckily I sold them for a lot more than I paid
so not all bad.. It was like going back to wooden Bridgestones IME - camber had to be raked off, weighing scales were not happy, fear of wheel durability, tried softer springs... I certainly considered it a backward step & gave up, they can fit, you can make them work, but better than 16" No.
Suffice it to say I sold my 18" spiders, I found they didn't perform as well as the 16" and TBH I didn't think they looked any better? Luckily I sold them for a lot more than I paid
so not all bad.. It was like going back to wooden Bridgestones IME - camber had to be raked off, weighing scales were not happy, fear of wheel durability, tried softer springs... I certainly considered it a backward step & gave up, they can fit, you can make them work, but better than 16" No.Yea the car had 16" estroils on allround first and we used to have another 450 Chimaera with 18s" on the back & 17s" on the front don't see the differnce we have a Cerbera as well and the Chimaera is more set on the road than it. If you think about it what have you changed wheel size is still the same the rest will all depend or spring ratings and how hard a ride you are willing to have. the handling of the car changes with there is no tyre wall buckle before the back end bracks away so it gives less warning but on the other hand stays inline longor as you don't have the tyre wall buckle. just my view each to there own will depend on your driving style and what you want from the car
THE AJP CHIMAERA said:
[URL=http://sports.webshots.com/photo/2589045160102470556opmjcn]
[/URL]
This is my car on 18" spiders just do all the rest suspension and brakes polly bushes and get it set up will sit and handle better than any standard Chimaera
This is what I am looking for!!!! Where do I find these?This is my car on 18" spiders just do all the rest suspension and brakes polly bushes and get it set up will sit and handle better than any standard Chimaera
About these 16', 17' and 18' myths: Oversteer? This is what I am actually looking for to have fun!
If I need understeer, I take my mums Audi A6 Diesel... Plenty of understeer.... no matter what tires are on it ;-)
Edited by doppioexpresso on Monday 30th March 12:20
doppioexpresso said:
About these 16', 17' and 18' myths: Oversteer? This is what I am actually looking for to have fun!
You misunderstand what I am saying and it isn't a myth. Oversteer is fun when the car flips into oversteer in a way that allows the driver to catch and hold it. The driver needs two things to make that possible. Firstly you need to have some indication that you are progressing towards oversteer and secondly you need the oversteer to slide out so that you have time to react. Progressive oversteer is generated by the loaded rear tyre tucking in. This slowly reduces the contact patch providing the driver with a gradual loss of rear grip. Reducing sidewall height reduces the amount of lateral flexibility in the tyre and therefore removes the progressiveness. Breakaway occurs suddenly, more like a jump than a slide, the car will often end up so far sideways that driver has insufficient steering lock to correct. You end up doing a 360. If you enjoy oversteer then you definitely want 16". If you like 360's then go for the 18". 18" will not give you enjoyable oversteer.Ask your self, are you wanting 18" because you believe it will improve the cars handling or are you wanting to fit them because you believe they will make the car look better? If it's the former then you have not understood the physics of oversteer, if it's the latter then so be it. If looks are more important to you than handling then OK
It's not just the sidewall height Bob.. Even the 16" wheels quoted here vary in width.. Folks need to look at the bead width, tyre tread width, as well as profile (which is a ratio of width not a linear measurement). The sidewall stiffness is always a problem as it is also related to the loading - & our cars are very light with huge tyre width! Reducing profile just exacerbates this problem. The wheel follows an arc under suspension travel and the tarmac may not be uneven either - draw yourselves a few boxes and see how much more flex you asking from a lower profile tyre just to stay on the rim and keep contact on the road, sketching it out makes it much more apparent 

Gassing Station | Chimaera | Top of Page | What's New | My Stuff





Can't tell much bloomin difference between motorways & B roads these days... Bump Bang Boing... 