Can the rev counter be re-set to zero??

[Jaye R]

I have for a while now been trying to solve the problem of my ideal speed being just over the 1000 mark (about 1025/50)...this has proved to be a problem that will not go away

I have just noticed, however, that when the car is not running the rev counter is not actually on the zero - it is just above (about 50/75).

In conclusion then my idle speed is correct and my rev counter is showing about 50/75 revs to many.

Anyone know whether you can re-set the rev counter so it starts at zero??

Or do I just put it down to one of those 'TVR' things?

Many thanks in advance

Cheers
Jaye

[Gerald-TVR]

Could well be a 'TVR' thing often my speedo shows 10/15 mph with ignition off - these does a danse while starting and the settles down

Edited by Gerald-TVR on Monday 30th March 09:36

[mep12345]

Sometimes mine reads zero sometimes anything up to 500rpm when switching off the ignition. But as soon as I re-energise by turning key to the pre-start/run position it always goes to zero until the key is moved to the start position and the starter motor kicks in.