brake master cylinder

[poolbry]

hi im after a brake master cylinder for my 350i 1988. its a girling 3pipe fitting no 74660294 323. has anybody got one please or no where i can get one. think this is the last resort

[350zwelgje]

Think you can still buy new.
Was once given the following website: www.powertrackbrakes.co.uk
Perhaps they can help you.

Had this problem myself and would like to overhaul it but couldn't find the right kit and ended up buying a new one from a friendly wedge owner who had one in stock.....

Rob

[jon haines]

i got one from rt racing a couple of years ago might be worth a call.

[Mr Tank]

Hi

Got a new one from TVR Carparts 2 months ago, he has them in stock!

Andy

[poolbry]

thanks guys you have been very helpful

[Poledriver]

I bought one from a normal motor factors 2 weeks ago MKIV Cortina!
There are also repair kits available on Ebay

ETA take time and care when bleeding the system after, you may need to do it 2 or 3 times!

Edited by Poledriver on Tuesday 31st March 20:22

[350zwelgje]

Poledriver said:

ETA take time and care when bleeding the system after, you may need to do it 2 or 3 times!

Fill with brake fluid before installation is a great help in bleeding it quickly once and for all, in all situations that the brake master was completely empty after a rebuild or new installation (not only wedges).

Rob

[poolbry]

hi can anybody help me please after 6 years totally renovating my wedge i had someone take it for an mot for me but on driving it they found when they accelarated there was nothing after 3000 revs and when they backed off the pedal it seemed to pick up. when i had the mot done it failed on the emissions. dont no where to start looking. would be grateful for any ideas please

[350zwelgje]

Would start to check basics first myself like: ignition, throttle & throttlepot, airflowmeter still ok, etc.

By the way, think you would get more/better replies if you would post it as a new topic, as I don't think that the brakes have anything to do with this.

Rob