Emerald map

[steve-V8s]

Anybody got a working emerald map ideally for a 5.3 running wasted spark I can have a look at ?

[The AJP Griff]

I've got a copy of the 4.5 map that emerald give out.It's not ideal i know,but it does have an ignition map and might be a starting point?

[steve-V8s]

The AJP Griff said:

I've got a copy of the 4.5 map that emerald give out.It's not ideal i know,but it does have an ignition map and might be a starting point?

Mike YHM

[The AJP Griff]

steve-V8s said:

....Mike YHM

Returned

[steve-V8s]

The AJP Griff said:

steve-V8s said:

....Mike YHM

Returned

Ta mutch

[steve-V8s]

Hi Mike

Thanks for the map.

It seems a fair bit differnt to the one V8d supplied. One thing that is puzzzling me at the moment is how to get closed loop control. I think you have to select at what load and speed site you want closed loop to be active on the feedback mode page. On your map and mine all sites are set to open loop which may be why mine shows either warm up or open loop, how does this bit work ? As I understand it if you select adaptive with a wide band sensor it will populate the corrections page which you can then choose to adopt or not. I would eventually like to do that but at the moment I just want to get it running closed loop at idle with a narrow band to at least get close to the MOT emissions requirements.

The manual seems to assume some understanding of what is going on so doesn't help me a lot at the moment.

[AntonyJ]

To select open/closed/adaptive mode, select the speed/load cells that you want to change and then press either the + or - key to change the option.
This is on page 33 of the manual.