Rocker Cover Bolts
Discussion
It looks like I have a small oil leak that has left a couple of small oil patches on the drive.
On a quick inspection under the car I can see a 'Drip' on the bottom of the bell housing. It has always been leak free up till now. I wanted to checked the tightness of the Rocker Covers but I couldn't get any of my sockets to fit. I havent come across the twelve point bolt before. Is it a standard size . Would I be best to take rockers off and put new gaskets on with /without some sort of sealer.
I am not sure where the leak is coming from at the MO but the rockers were my first point of call.
I dont appear to be using/loosing any oil or dispstick level going down.
Could be sump but I would have thought the bottom of the sump would be covered in oil.
I need to jack the car up and have a decent look but I will also need to get a socket for the rocker bolts. Would Hafrauds sell them?
Anywhere else the leak could come from. I will also check in side the bell housing as I have inspection flap but I am hoping that is not coming from there.
Car has done 29K miles and is a 2000 4.0. No work has recently been done on the engine.
Trev
On a quick inspection under the car I can see a 'Drip' on the bottom of the bell housing. It has always been leak free up till now. I wanted to checked the tightness of the Rocker Covers but I couldn't get any of my sockets to fit. I havent come across the twelve point bolt before. Is it a standard size . Would I be best to take rockers off and put new gaskets on with /without some sort of sealer.
I am not sure where the leak is coming from at the MO but the rockers were my first point of call.
I dont appear to be using/loosing any oil or dispstick level going down.
Could be sump but I would have thought the bottom of the sump would be covered in oil.
I need to jack the car up and have a decent look but I will also need to get a socket for the rocker bolts. Would Hafrauds sell them?
Anywhere else the leak could come from. I will also check in side the bell housing as I have inspection flap but I am hoping that is not coming from there.
Car has done 29K miles and is a 2000 4.0. No work has recently been done on the engine.
Trev
Like these http://cgi.ebay.co.uk/ROVER-V8-STAINLESS-ROCKER-CO... as mentioned already check the length.
Edited by That Daddy on Tuesday 31st March 15:33
Yep
Second that. Bought one at Halfrauds a while back, but still a complete PITA to get them out, especially along the driver's side where the coolant pipes are secured by the bolts as well. Once you get them out, as previously posted change 'em out for allen screws, and possibly invest in a set of long ball-ended keys to fit.You don't need them off very often (Hopefully!!) but for four screws what a chew on!!
HTH
Phil
Second that. Bought one at Halfrauds a while back, but still a complete PITA to get them out, especially along the driver's side where the coolant pipes are secured by the bolts as well. Once you get them out, as previously posted change 'em out for allen screws, and possibly invest in a set of long ball-ended keys to fit.You don't need them off very often (Hopefully!!) but for four screws what a chew on!!
HTH
Phil
Gassing Station | Chimaera | Top of Page | What's New | My Stuff








