What jumpleads
Discussion
Battery went flat (suprise), not a problem i thought ill jump it off my other car. I used 3.5 meter long and 25mm thick cables bought a while ago from good old halfrauds. They did not make a dent, went from completely flat to could just get the windows to move and that was about it. What grade/thickness of jump leads does everyone else use? Thanks.
Get proper commercial ones, have to be heavy duty to cope with heavy batteries and 24 volts. They are then suitable for any car as the voltage flow is much better. Your local motor factor or commercial factor should have them. I have had mine for twenty years, and they are still working perfect after starting lots off hgv, hope that helps.
Sounds like you didnt have a good connection, I have heavy duty jump leads and have used them a few times. It usually takes a few goes to get a good connection due to the location of the battery and the size of the crocodile clips.
Connect everything up with the other cars engine running and leave it for a few minutes so that some charge is transferred to your dead battery. This makes the boost starting a whole lot more cable friendly.
After a few minutes give it a go - if its not doing the trick try taking the leads off and refitting its probably just a bad connection.
Connect everything up with the other cars engine running and leave it for a few minutes so that some charge is transferred to your dead battery. This makes the boost starting a whole lot more cable friendly.
After a few minutes give it a go - if its not doing the trick try taking the leads off and refitting its probably just a bad connection.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


