HE'S BACK!

[frubes]

rotor arm

[tempus]

Doh.Tempus

[frubes]

it looked fine no cracks etc. But having taken it off the metal on the arm was loose, so poor spark. Needless to say i am now sitting outside a pub in the cotswolds with a big grin

[combine]

The ´joys ´of wedge ownership ?

[GV]

Would have taken 2 minutes to sus if you followed the non start fault finding sequence...

[80tasmin]

GV said:

Would have taken 2 minutes to sus if you followed the non start fault finding sequence...

Which is?

[GV]

80tasmin said:

GV said:

Would have taken 2 minutes to sus if you followed the non start fault finding sequence...

Which is?

As per the factory instructions featured in the Wedge Bible..

[frubes]

Well the thing was it was sparking. The Rac only worked it out by taking the cap off dizzy and holding the king lead over teh arm while it was cranking.

[80tasmin]

GV said:

80tasmin said:

GV said:

Would have taken 2 minutes to sus if you followed the non start fault finding sequence...

Which is?

As per the factory instructions featured in the Wedge Bible..

Thanks Andrew....Bought a 1980 Tasmin last November, the Canadian winter forced it into storage. Brought it home just this past weekend. Placing an order for Steve Heath's book tonight, something I should have done last fall.
Paul