New Rad, couple of questions...
Discussion
Right, after noticing the car running a bit warmer than usual over the last few days, the cooling system was checked over and re-bled while I was over at SC-Power yesterday. Lots of air came out and lots of water went in and after the drive home, things were still hot and I noticed that the expansion tank level had diminished somewhat.
So I ran the car up to full temp today with the bonnet up and I noticed some steam coming out of the drivers side of the rad. Had a good look from inside the nose and its definitely leaking, and by a fair amount as well. This one has been re-cored twice by the previous owner so I've decided to go with a new rad, and an aluminium one to aid cooling since the charger has gone on.
I'm pretty sure I'll just stick a Radtec one in, but while I'm doing this I was going to move the fan control over to dual-stage on the Emerald, and was thinking about upgrading the fans to something like a pair of Kenlowe fans. I'm not sure this is really necessary though, especially with a alloy rad. My friend has a pair fitted to his pre-cat Griff though and I have to say they are quieter and quicker at bringing the temp down, so I'm sort of tempted. Is it worth it, or should I just re-use the old ones?
So I ran the car up to full temp today with the bonnet up and I noticed some steam coming out of the drivers side of the rad. Had a good look from inside the nose and its definitely leaking, and by a fair amount as well. This one has been re-cored twice by the previous owner so I've decided to go with a new rad, and an aluminium one to aid cooling since the charger has gone on.
I'm pretty sure I'll just stick a Radtec one in, but while I'm doing this I was going to move the fan control over to dual-stage on the Emerald, and was thinking about upgrading the fans to something like a pair of Kenlowe fans. I'm not sure this is really necessary though, especially with a alloy rad. My friend has a pair fitted to his pre-cat Griff though and I have to say they are quieter and quicker at bringing the temp down, so I'm sort of tempted. Is it worth it, or should I just re-use the old ones?
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


