jacking point??
Discussion
I used the scissor jack a few months back on mine... placed on the outrigger close the the corner plate... works fine.
If you have a low profile trolley jack, then you can reach right into the square box section, although you'll find that you lift the entire front or back of the car at the same time.
If your outrigger is in good shape, then this shouldn't be a problem... if it isn't then changing the wheel is the least of your worries... you probably need to get it seen to.
If you have a low profile trolley jack, then you can reach right into the square box section, although you'll find that you lift the entire front or back of the car at the same time.
If your outrigger is in good shape, then this shouldn't be a problem... if it isn't then changing the wheel is the least of your worries... you probably need to get it seen to.
locodude said:
rigga said:
If im raising the rear at all for work on any side i do so by jacking under the diff....
Not such a good idea as all the weight of the car is taken on the diff bushes 
As i say,if you have firm evidence to suggest jacking the car by the diff is not recomended id be happy to be proved wrong,but the bush's purpose is to locate the diff to the chassis,allow some movement to take up drive line shock,but prevent excessive movement,so the diff is pretty well firmly attached to the chassis..... jacking the car up this way ive never had any issues with on any car....
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


