Poly Bushes - Taken the plunge
Discussion
Just ordered myself a full polybush set (3a) from Steve Heath including the ARB drop links and a few other goodies. I thought i may aswell get my wishbones done while the car was off the road (exhaust modification in process
). So now the plan of action is to remove all wishbones, exhaust undertray, anti-roll bars, remove bushes, shot blast, powdercoat, polybush and put all back together with the new shiny exhaust and that is the only big job (that i know of) on the car that needs doing.
Then it will be off for a geometry and suspension set up and it should handle like a goodun
I will post before and after pics up here aswell
Any tips and/or experiences before i crack on with the work tomorrow?
). So now the plan of action is to remove all wishbones, exhaust undertray, anti-roll bars, remove bushes, shot blast, powdercoat, polybush and put all back together with the new shiny exhaust and that is the only big job (that i know of) on the car that needs doing.Then it will be off for a geometry and suspension set up and it should handle like a goodun
I will post before and after pics up here aswell
Any tips and/or experiences before i crack on with the work tomorrow?
Quick update to this:
All old bushes have been removed, wishbones and arb's are off to the powdercoaters atm, new bushes and drop links just arrived, and i have cleaned up all 4 corners of the chassis and cleaned up / repainted the hubs.
Just waiting for the powdercoating to be done and i can reassemble
This is where i am at:




All old bushes have been removed, wishbones and arb's are off to the powdercoaters atm, new bushes and drop links just arrived, and i have cleaned up all 4 corners of the chassis and cleaned up / repainted the hubs.
Just waiting for the powdercoating to be done and i can reassemble

This is where i am at:




lewis_sharman said:
Mr Nordic said:
Lewis,
Your chassis is absolutely pukka.
I should hope so, it was new in 2004 Your chassis is absolutely pukka.

And who says you can't get a good Chim for £6k!

Lets just hope i can keep it that way.
Edited by lewis_sharman on Wednesday 22 April 09:12
tty brake hoses while your at it
keep up the good work STEV8E said:
Lewis,
Not that I like spending other peoples money! But is it not worth replacing the balljoints and rod ends while its in bits and before the geo?
I had'nt really looked into this tbh, i did check the rest of the steering parts and joints and they all seem pretty solid. But you do throw up a good point of 'while its apart, i may aswell . . . ' (i replaced the fuel filter aswell yesterday - i can't see how people can do that without taking the suspension off!)Not that I like spending other peoples money! But is it not worth replacing the balljoints and rod ends while its in bits and before the geo?
Where abouts can you get the balljoints and rod ends from?
And any more suggestions while access is good?
Hi Lewis
This place TVR supplies I believe is the cheapest for these parts and no VAT
1 pair lower ball joints=£28.99
1 pair upper ball joints=£34.99
1 pair t/rod ends =£16.99
email tvrsupplies@tiscali.co.uk
His name is Mike and he is a PHer and I think its AJPGrif
Trev
Site Address: http://www.tvrsupplies.co.uk/
This place TVR supplies I believe is the cheapest for these parts and no VAT
1 pair lower ball joints=£28.99
1 pair upper ball joints=£34.99
1 pair t/rod ends =£16.99
email tvrsupplies@tiscali.co.uk
His name is Mike and he is a PHer and I think its AJPGrif
Trev
Site Address: http://www.tvrsupplies.co.uk/
Edited by WOO5IE on Wednesday 22 April 14:31
I have just bought lower ball joints from TVR supplies. I dont think Mike does the uppers anymore so I bought them from Clever Trevor. However TVR supplies do not do the bolts for the lowers but Clever Trevor does so I got them from there.... still with me. 
Lewis, I did the fuel filter in October as part of the 12,000 service (got the kit from Mike) yeah what a PITA

Lewis, I did the fuel filter in October as part of the 12,000 service (got the kit from Mike) yeah what a PITA
STEV8E said:
I have just bought lower ball joints from TVR supplies. I dont think Mike does the uppers anymore so I bought them from Clever Trevor. However TVR supplies do not do the bolts for the lowers but Clever Trevor does so I got them from there.... still with me. 
Lewis, I did the fuel filter in October as part of the 12,000 service (got the kit from Mike) yeah what a PITA
Mike definitely did uppers about a year ago, I got mine from there. Bolts for lowers are just std m8 affairs.
Lewis, I did the fuel filter in October as part of the 12,000 service (got the kit from Mike) yeah what a PITA
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




