just can`t find anything wrong !
Discussion
as some of you will know ive had a weird clatter noise on tick over and when the engine is on load,ive now got the mark adams chip fitted and the engine set up .it goes very well , the engine as been looked at by a v8 specailist and can not find the problem .i have eather got to wear ear muffs or stick the radio on or sell it .the only thing it could be is the carbon trumpets .the exhaust manifold is fine and all the internals .part of the engine as been stripped and examined,but nothing .dizzy as been removed and rebuilt but nothing . !the compression is perfect the oil pressure perfect and its very fast just the clatter !.
Cant really see why the carbon trumpets could create such a noise Daz,as they are just a means for the inlet air to reach the inlet manifold.... as you describe the noise as a clatter,that would appear to me to be mechanical of some sorts,gotta be a weird fault (if any) for a specialist not to find it..... fancy trying to record the noise and stick a sound file up to see if anyone can hazard a guess (long range diagnosis is never the best idea,but it might help)
hi, removed pre cats last year , main cat still in .since the new chip i have found the rev counter sticks around 1200 rpm for a while before dropping tp 900rpm , a bit annoying at traffic lights .other than that i can`t beleive the difference in power ,its a combination of the mark adams chip and the way its been set up , if i only could sort the clatter noise, if you stick it in 4th or 5th gear at around 30mph and gently push the throttle the noise is terrible untill it starts reving then around 3200 rpm its fine . keep the revs up as you drive and its perfect .,
Edited by daz the plumber on Monday 6th April 21:32
hi, removed pre cats last year , main cat still in .since the new chip i have found the rev counter sticks around 1200 rpm for a while before dropping tp 900rpm
Mine does the same once it has fully warmed up daz.
Did mark set yours up? im still waiting for my slot might of sold it by then.
Mine does'nt clatter though no idea what that is.
Mine does the same once it has fully warmed up daz.
Did mark set yours up? im still waiting for my slot might of sold it by then.
Mine does'nt clatter though no idea what that is.
daz the plumber said:
if you stick it in 4th or 5th gear at around 30mph and gently push the throttle the noise is terrible untill it starts reving then around 3200 rpm its fine . keep the revs up as you drive and its perfect
Probably too obvious to mention at this stage, after everyone's given their opinion, but the circumstances suggest detonation must be a candidate. Have you ruled out each of the possible causes of this?ive just had a think, when i got the car back it was alot better and i could live with it .the car was set up with high octane in the tank and on the way back i stuck some standard fuel in ,this must be the problemm , should i have had the engine set up with the standard fuel or stick with the high octane ,looks like it des not like to run on standard supermarket petrol. .
daz the plumber said:
ive just had a think, when i got the car back it was alot better and i could live with it .the car was set up with high octane in the tank and on the way back i stuck some standard fuel in ,this must be the problemm , should i have had the engine set up with the standard fuel or stick with the high octane ,looks like it des not like to run on standard supermarket petrol. .
If it was et up on super unleaded then you should run it on super unleaded. I cetainly wouldn't be happy if there was predetonation going on. Best advice is to run on the highest octane fuel you can find, don't labour the engine and get it checked ASAP.
Hi Daz
A quick and easy test would be to temporarily remove the vacuum advance pipe to the distributor and then try it, this should retard the ignition (if its working) if the clatter goes away then you know thats the problem.
Bear in mind to change one thing at a time when testing otherwise you don't know where you are
A quick and easy test would be to temporarily remove the vacuum advance pipe to the distributor and then try it, this should retard the ignition (if its working) if the clatter goes away then you know thats the problem.
Bear in mind to change one thing at a time when testing otherwise you don't know where you are
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


