Retrofit parking sensors
Retrofit parking sensors
Author
Discussion

dave_s13

Original Poster:

14,031 posts

300 months

Tuesday 7th April 2009
quotequote all
Recently purchased a 1998 540i Touring and it is sans PDC, which is a bit rubbish.

I've done a search on here, and the usual beemer forums and all I got was confused. The ideal would be to fit OEM sensors and control unit but this seems to be very expensive compared to an afermarket kit that does exactly the same thing.

All I want is a beep beep beep job not one of these tacky display thing sellotaped to my windscreen.

There's loads on ebay et al but I don't want to buy a cheap, $hitty one. So can anyone recommend a unit that will last, and is accurate.

Re. fitting. I'm having my tailgate tidied up next week so going to get the sensors professionally painted and mounted in the bumper, I can wire them up myself.

Thoughts welcome

ps. please don't move this to the "retrofitting parking sensors to a 1998 540 touring chat" sub forum....;)

Edited by dave_s13 on Tuesday 7th April 11:33

dave_s13

Original Poster:

14,031 posts

300 months

Tuesday 7th April 2009
quotequote all
I may have answered my own question

These look good

http://www.parkingdynamics.co.uk/

No need to drill any holes. Anyone have any experience with these?

Shake&Bake

371 posts

216 months

Tuesday 7th April 2009
quotequote all
Why are there no close up pictures of the sensors mounted to the bumper in the advert?

By the looks of it you will have ugly wires poking out of your boot to feed the sensors if I'm not mistaken?

ShadownINja

80,179 posts

313 months

Tuesday 7th April 2009
quotequote all
Interesting. Looks like you have a strip across your bumper rather than a circular sensor.

sadako

7,080 posts

269 months

thehawk

9,335 posts

238 months

Tuesday 7th April 2009
quotequote all
You could always just learn to drive properly.

AdeTuono

7,626 posts

258 months

Tuesday 7th April 2009
quotequote all
[quote=Shake&Bake]Why are there no close up pictures of the sensors mounted to the bumper in the advert?
[/quote]

Er, because they're not visible when fitted, according to the blurb. Fits inside the bumper.

voicey

2,494 posts

218 months

Tuesday 7th April 2009
quotequote all
I have one of those invisible parking sensors and it's toilet. I have heard good things about the ones that are hidden in the number plate surround if you don't fancy drilling the bumper.

G_T

16,163 posts

221 months

Tuesday 7th April 2009
quotequote all
I had a look at these some months ago... I only didn't bother because of the lack of reviews.

It's worth bearing in mind that electromagnetic parking sensors only work while the vehicle is in motion though. So if you stop just before the object you'll have no guage of it's distance which will necessitate a forwards/backwards movement. Sounds trivial but I think in reality this could be an irritant. Still seems a better idea than drilling holes in the bodywork though.

To address the comment of "drive properly" made by some smart arse. Try parking a sodding Jaguar XJ in Edinburgh city centre during rush hour with st visibity then come back. You need all the help you can get in some cars. biggrin





G_T

16,163 posts

221 months

Tuesday 7th April 2009
quotequote all
voicey said:
I have one of those invisible parking sensors and it's toilet. I have heard good things about the ones that are hidden in the number plate surround if you don't fancy drilling the bumper.
If it fits into the number plate I doubt it's wide enough to provide enough reliable coverage?

So the electromagnetic ones are pish? Where did you hear that?

voicey

2,494 posts

218 months

Tuesday 7th April 2009
quotequote all
G_T said:
voicey said:
I have one of those invisible parking sensors and it's toilet. I have heard good things about the ones that are hidden in the number plate surround if you don't fancy drilling the bumper.
If it fits into the number plate I doubt it's wide enough to provide enough reliable coverage?

So the electromagnetic ones are pish? Where did you hear that?
I didn't hear it - I've got one fitted to my car.

G_T

16,163 posts

221 months

Tuesday 7th April 2009
quotequote all
voicey said:
G_T said:
voicey said:
I have one of those invisible parking sensors and it's toilet. I have heard good things about the ones that are hidden in the number plate surround if you don't fancy drilling the bumper.
If it fits into the number plate I doubt it's wide enough to provide enough reliable coverage?

So the electromagnetic ones are pish? Where did you hear that?
I didn't hear it - I've got one fitted to my car.
Haha. Sorry I didn't read your post properly!

So you wouldn't recommend one then?

gti tim

1,633 posts

232 months

Wednesday 24th March 2010
quotequote all
Bught and fitted these recently :

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

cost : £15.99 delivered.

fitted in under an hour - works fine - beeps get quicker as i get closer to objects.

it even comes with the hole saw to drill the bumper. Wondering why i havent bought some before - will be buying another set for the wife's car shortly.