Heater contol cables
Discussion
Hi all
Doing some jobs to the Chimaera interior. Had one success in finding a replacement mirror select switch that fits with minor fettling, so after 18 months have adjustable mirrors
but now looking at replacing the black heater controls for silver.
Realised that the existing air direction wheel (bottom) is moving the cable, but the cable isn't moving anything else i.e. I get air top and bottom regardless. Where does that cable go to? I have a nasty suspeicion that you're going to say the heater unit buried behind the battery/fuseboard.
Bu the way - thanks to all of you who've described removing the dash top in the past - thought it would be a nightmare but did it last night, 5 minutes, doddle!
Doing some jobs to the Chimaera interior. Had one success in finding a replacement mirror select switch that fits with minor fettling, so after 18 months have adjustable mirrors
but now looking at replacing the black heater controls for silver.Realised that the existing air direction wheel (bottom) is moving the cable, but the cable isn't moving anything else i.e. I get air top and bottom regardless. Where does that cable go to? I have a nasty suspeicion that you're going to say the heater unit buried behind the battery/fuseboard.
Bu the way - thanks to all of you who've described removing the dash top in the past - thought it would be a nightmare but did it last night, 5 minutes, doddle!

Konrod said:
I have a nasty suspeicion that you're going to say the heater unit buried behind the battery/fuseboard.
Not quite mate. Reach up to the left of the passenger footwell (just under the dashboard) and peel the carpet away. That's where you'll find the cable end link to the hot/cold switch.When my cable failed though, it was the under dash connection so you may have to remove that once again

Hmmm. Had a look at the cables, both clamped in the ali block OK, and both inners are running/moving freely the wheels are turned., but the direction wheel has no resistance
so I suspect that there is a flap somewhere the direction wire pushes/pulls and the wire has come off at that end or the flap is bust. Question is where the flap is.........
so I suspect that there is a flap somewhere the direction wire pushes/pulls and the wire has come off at that end or the flap is bust. Question is where the flap is.........Edited by Konrod on Wednesday 8th April 09:15
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


