Replacing handbrake cable
Replacing handbrake cable
Author
Discussion

brian7136

Original Poster:

50 posts

212 months

Tuesday 7th April 2009
quotequote all
Any tips please, guys? Slackened the adjuster right off and dropped it out of its chassis bracket, disconnected the cables from the calipers, but still the handbrake will only come up to 45 degrees, so I can't get the tunnel top off. The lever seems to come up against a solid stop at this point. How would I get it over the door opening knob anyway? Is this the right way to disconnect the cable from the lever, or should it be done from underneath?

scotty_d

6,795 posts

225 months

Tuesday 7th April 2009
quotequote all
Hi it is a underneath job you have to drop the exhaust off not too bad a job if you can get it on a ramp. it is a pin with a split pin through it on that half moon shaped piece of metal

Edited by scotty_d on Tuesday 7th April 21:16

brian7136

Original Poster:

50 posts

212 months

Wednesday 8th April 2009
quotequote all
Cheers Scotty. I'll brace myself for having a go this weekend.

Chimtastic

139 posts

234 months

Wednesday 8th April 2009
quotequote all
and don't forget the WD40!