5w / 40 A wee bit thin ??
Discussion
OK , first off I didn't really want 5w / 40 but my mate's got a Halfrauds trade card so I asked him to purchase me some lovely 10 w/40 Mobil 1 on account of my sump wearing through and me losing all my oil on the drive!
He came back with The 5w/40 Halfords own brew saying that they didn't have any of the stuff I wanted and the home grown was probably as good. I thought I'd give it a go anyway and so filled her up. The result is not a lot of oil pressure (down to 10 on tickover only 30 at hooning revvs) a lot of clatter I didn't have before and a missfire.
All the oil pressure issues and excessive noise I can put down to the folly of using sewing machine oil instead of the proper stuff I'd like your opinions on weather its so thin that it could affect the lifters possibly producing rough running. It was running fairly sweetly(ish) before the oil change and 'no I didn't run her out of oil when the sump sprang a leak , she was still holding good pressure when I shut her down '.
Yours in anticipation of being mocked mercilessly,
Nick.................
He came back with The 5w/40 Halfords own brew saying that they didn't have any of the stuff I wanted and the home grown was probably as good. I thought I'd give it a go anyway and so filled her up. The result is not a lot of oil pressure (down to 10 on tickover only 30 at hooning revvs) a lot of clatter I didn't have before and a missfire.
All the oil pressure issues and excessive noise I can put down to the folly of using sewing machine oil instead of the proper stuff I'd like your opinions on weather its so thin that it could affect the lifters possibly producing rough running. It was running fairly sweetly(ish) before the oil change and 'no I didn't run her out of oil when the sump sprang a leak , she was still holding good pressure when I shut her down '.
Yours in anticipation of being mocked mercilessly,
Nick.................

f@-pots said:
OK , first off I didn't really want 5w / 40 but my mate's got a Halfrauds trade card so I asked him to purchase me some lovely 10 w/40 Mobil 1 on account of my sump wearing through and me losing all my oil on the drive!
He came back with The 5w/40 Halfords own brew saying that they didn't have any of the stuff I wanted and the home grown was probably as good. I thought I'd give it a go anyway and so filled her up. The result is not a lot of oil pressure (down to 10 on tickover only 30 at hooning revvs) a lot of clatter I didn't have before and a missfire.
All the oil pressure issues and excessive noise I can put down to the folly of using sewing machine oil instead of the proper stuff I'd like your opinions on weather its so thin that it could affect the lifters possibly producing rough running. It was running fairly sweetly(ish) before the oil change and 'no I didn't run her out of oil when the sump sprang a leak , she was still holding good pressure when I shut her down '.
Yours in anticipation of being mocked mercilessly,
Nick.................
im short sighted and dyxlexic did you put WD40 in your engine?He came back with The 5w/40 Halfords own brew saying that they didn't have any of the stuff I wanted and the home grown was probably as good. I thought I'd give it a go anyway and so filled her up. The result is not a lot of oil pressure (down to 10 on tickover only 30 at hooning revvs) a lot of clatter I didn't have before and a missfire.
All the oil pressure issues and excessive noise I can put down to the folly of using sewing machine oil instead of the proper stuff I'd like your opinions on weather its so thin that it could affect the lifters possibly producing rough running. It was running fairly sweetly(ish) before the oil change and 'no I didn't run her out of oil when the sump sprang a leak , she was still holding good pressure when I shut her down '.
Yours in anticipation of being mocked mercilessly,
Nick.................


I run on 5/50 Valvolene VR1. The engine is a V8 Developments and this was their advice.
My oil pressure is steady on 60 at all temperatures and RPM. No noise that shouldn't be there, but plenty that should
The oil consumption is a little higher than on 20/50, but the better protection on start up and cold is worth it to me.
My oil pressure is steady on 60 at all temperatures and RPM. No noise that shouldn't be there, but plenty that should

The oil consumption is a little higher than on 20/50, but the better protection on start up and cold is worth it to me.
Strange my Chim as run on fully syn 5/40 Vauxhall and Quantum(VAG group lately Vauxhall no longer sell 5/40))since i purchased it with 112K now at 122k
i have had no problems with clatter or oil burning(1 litre approx every 1500 miles)and change it every 3k with oil pressure stinking hot 18/20 idle and 35 off idle although i have some nice 15/50 Mobil Motorsport(bulk buy) to go in shortly when i uprate the Camshaft etc etc,just a heads up really maybe the Halfrauds stuff is crap i dunno
in saying this i think these engines are happier with oil with a bit more body 10/50 15/50 etc and discussed on these forums so many times before.
i have had no problems with clatter or oil burning(1 litre approx every 1500 miles)and change it every 3k with oil pressure stinking hot 18/20 idle and 35 off idle although i have some nice 15/50 Mobil Motorsport(bulk buy) to go in shortly when i uprate the Camshaft etc etc,just a heads up really maybe the Halfrauds stuff is crap i dunno
in saying this i think these engines are happier with oil with a bit more body 10/50 15/50 etc and discussed on these forums so many times before.Edited by Simon Says on Wednesday 8th April 21:27
I was just having the same debate. Opie oils recommended a synthetic 5w40, whereas I have always used a semi synthetic 10w40. The garage that service my car advised against the 5w40 saying it would be too thin. So now I am worried, doe i drainout £50 worth of 5w40 that went in yesterday and replace it with 10w40. or do i take the risk and do a year on 5w40? Engine only has 14000 miles on it. But I will be doing le mans run in it with 2 up, luggage, and fast driving.
I would hate to kill the engine
Nick
I would hate to kill the engine
Nick
STE VR said:
My Chim has always had 0/40 Mobil 1 since new. Its on 94K and never had a cam change etc. Pulled 219bhp at the last RR session so I'm rather happy with the thin oil.
As usual all TVR's are different. My 450 rattles like a bag of spanners (well ok not quite that bad but ou know what I mean) if run on standard mobil 1 0w/40. Fill her up with semi-syn 10W40 and she runs fine, no clattering and good oil pressure.I guess the answer is if you dont have any problems (no rattling, good oil pressure across the rev range) then dont worry. IMHO anyway.
blueg33 said:
I was just having the same debate. Opie oils recommended a synthetic 5w40, whereas I have always used a semi synthetic 10w40. The garage that service my car advised against the 5w40 saying it would be too thin. So now I am worried, doe i drainout £50 worth of 5w40 that went in yesterday and replace it with 10w40. or do i take the risk and do a year on 5w40? Engine only has 14000 miles on it. But I will be doing le mans run in it with 2 up, luggage, and fast driving.
I would hate to kill the engine
Nick
Listen if i thought 5/40 would kill my engine it would be out already that is quite simply not going to be the case I would hate to kill the engine
Nick
dont worry. f@pots,sorry mate Silver ones are quicker FACT
Bigdods my brother uses the 10/40 semi and he seems happy enough
everyone as differing opinions i suppose. Edited by Simon Says on Thursday 9th April 09:50
I hear what you guys are saying and appreciate your comments. As has been said , our engines are all different and are at different stages of wear in their lives ,they are at different stages of tune and have many varying mods carried out. Mine is a pretty stock 4.0 and of a design which is advanced in years. And so ,I'm going to use the advice of V8 Developments and the evidence of my own eyes and ears and drain off the 5w / 40 replacing it with some 10 or 15w/50 good quality oil. It may seem like an overly cautious move to some but it certainly won't hurt my engine and 'may' help it to last a little longer.
Nick.................
Nick.................

ive tried all types of oils from fully synthetic 10/50 15/50 10/60 and i like this oil its american made by lucas . you can get fully synthetic 20/50 but i use the mineral 2.5 us gallons for £34 does two oil changes .
http://cgi.ebay.co.uk/Lucas-High-Spec-20-50-20w50-...
http://cgi.ebay.co.uk/Lucas-High-Spec-20-50-20w50-...
Gassing Station | Chimaera | Top of Page | What's New | My Stuff







