Tasmin Race Suspension

[SubRosa]

Anybody got any pics of front and rear race setups for the Tazzy they can post up please? Any info on the rose joints, tube sizes and any modified or strengthened pick up points would be much appreciated too.

Many thanks.

[TVRleigh_BBWR]

Have a look though my progress report there's quite a lot of pic's esp. of the base chassis.

http://www.pistonheads.co.uk/gassing/topic.asp?h=0... report.

[SubRosa]

Cheers leigh. Interesting to see that the tie rods and the roll bar mount to the rear of the hub. Are you using standard Granada hubs and are the tie rods back to the chassis custom made? One other question, what shocks and springs are on there? Mine will be modified for the road only but I want coil overs mounted properly.

[TVRleigh_BBWR]

SubRosa said:

Cheers leigh. Interesting to see that the tie rods and the roll bar mount to the rear of the hub. Are you using standard Granada hubs and are the tie rods back to the chassis custom made? One other question, what shocks and springs are on there? Mine will be modified for the road only but I want coil overs mounted properly.

All the hubs are standard TVR/Granada, all mounts are custom made, plus shocks are Nitrons.

Bells are custom made and disc's and calipers are AP R5000's (4 pots) and AP 303mm Disc's

Also not sure if it's on any of the current picture, but if you do the front suspension mounts like mine your will need a cross brace, you may see the extra bit with the holes to take the brace.

If your local you wellcome to come over and have a look.

Leigh

[SubRosa]

TVRleigh_BBWR said:

If your local you wellcome to come over and have a look.

Leigh

Thanks Leigh, may well take you up on that in the next couple of weeks if that's ok. I'm just over the river from you.

[TVRleigh_BBWR]

Send me a PM, and I'll give you my telephone number.

Hopefully be at Cadwell racing next weekend, but should be home the weekend after.

[grahamw48]

I'm intending going to Cadwell next weekend....will look out for you.