16 inch Estorils on the Front,what tyre size?
16 inch Estorils on the Front,what tyre size?
Author
Discussion

6407N

Original Poster:

50 posts

271 months

Saturday 11th April 2009
quotequote all
Hi all,just acquired a set of 16 inch Estorils for my 2000W Chimaera,I am running Toyo's on the rear and would like to match them on the front.What size is best please?I dont really want to use stops if I dont have to.
Cheers....

S4CJO

429 posts

290 months

Sunday 12th April 2009
quotequote all
Hi,

Have the same set up on my 98 450 Chim and also have Toyo's on all corners. Will check in the morning the size on the front though I did need to fit the stops as the rim not the tyre on the nearside fouled the anti roll bar on full lock. Fitting the stops took about an hour and as the Merekat says "Simples..... yes ".

Back soon.

V8 GRF

7,299 posts

241 months

Sunday 12th April 2009
quotequote all
If you've PAS I have 225/45/16 on the front. I needed two stops on the offside to stop the rim catching the lower suspension arm on full lock. It all depends on how central your steering rack is mounted as to what is required.

S4CJO

429 posts

290 months

Sunday 12th April 2009
quotequote all
As V8 GRF I have the same running at present Toyo.On the rack it was only the nearside rim which was fouling though I put a spacer on both sides to even things up.

Reason for going 16" at the front 300mm disc and Tuscan calipers.

6407N

Original Poster:

50 posts

271 months

Sunday 12th April 2009
quotequote all
Thanks for the info,where did you get the spacers and are the steering rack stops available in motorspares outlets etc please?
Cheers

Edited by 6407N on Sunday 12th April 09:33

Halfman

65 posts

271 months

Sunday 12th April 2009
quotequote all
Just done the same on mine 225/45/16 on the front and 245/45/16 on the rear with 3mm spacers on the front to avoid rubbing. Got some useful info here
http://www.pistonheads.com/xforums/topic.asp?h=0&a... 16" wheels on the front.&mid=32861

S4CJO

429 posts

290 months

Monday 13th April 2009
quotequote all
Look here:

Rack Stops

6407N

Original Poster:

50 posts

271 months

Monday 13th April 2009
quotequote all
Thanks for all the information,I shall try the spacers first and then rack stops.
Much obliged....

V8 GRF

7,299 posts

241 months

Monday 13th April 2009
quotequote all
6407N said:
Thanks for all the information,I shall try the spacers first and then rack stops.
Much obliged....
You don't need the spacers for the wheels to fit and you might not need the rack stops either, fit the wheels first then check to see if you're happy with the very slight inset (it 'ain't really noticeable) and if the wheels foul the suspension on full lock only then do you know if you need either.