service intervals
service intervals
Author
Discussion

jdl1981

Original Poster:

299 posts

214 months

Sunday 12th April 2009
quotequote all
Does anyone know why the service intervals are so short? I had a service in December and because it is my only car, it will be due another very soon.

Tyre_Tread

10,697 posts

247 months

Sunday 12th April 2009
quotequote all
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.

The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.

You could just ignore the service intervals and wait until something breaks but it could break you!


Blown2CV

31,662 posts

234 months

Sunday 12th April 2009
quotequote all
jdl1981 said:
Does anyone know why the service intervals are so short? I had a service in December and because it is my only car, it will be due another very soon.
Cos its a performance car! Might be cheaper to get a second car for everyday use than to keep the Tiv in the road doing those kind of miles...

Tyre_Tread

10,697 posts

247 months

Sunday 12th April 2009
quotequote all
Just noticed that this subject is covered in Steve Heath's book on Chims and Griffs in some detail.

jdl1981

Original Poster:

299 posts

214 months

Monday 13th April 2009
quotequote all
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.

The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.

You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!

Tyre_Tread

10,697 posts

247 months

Monday 13th April 2009
quotequote all
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.

The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.

You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!
Which is why I have, this very weekend, spent a day tending to the needs of my Chim biggrin

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).

jdl1981

Original Poster:

299 posts

214 months

Monday 13th April 2009
quotequote all
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.

The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.

You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!
Which is why I have, this very weekend, spent a day tending to the needs of my Chim biggrin

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
unfortunately i don't know one end of a spanner from the other! I just know how to drive it! Thats why it gets expensive for me. Maybe it's time to get skilled up

Tyre_Tread

10,697 posts

247 months

Monday 13th April 2009
quotequote all
jdl1981 said:
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.

The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.

You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!
Which is why I have, this very weekend, spent a day tending to the needs of my Chim biggrin

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
unfortunately i don't know one end of a spanner from the other! I just know how to drive it! Thats why it gets expensive for me. Maybe it's time to get skilled up
I was thinking about starting to offer to show people how to do the basics as a day course but the legalities and H&S issues are daft.

jdl1981

Original Poster:

299 posts

214 months

Monday 13th April 2009
quotequote all
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
jdl1981 said:
Tyre_Tread said:
The 6k mile intervals are not short for an engine designed in the 1950s and run in a relatively high state of tune.

The other components tend to be more highly stressed (brakes/chassis/shocks etc) and so require regular checks to ensure they will contine to perform under the high stresses that they are run.

You could just ignore the service intervals and wait until something breaks but it could break you!
It will certainly get serviced when the 6k miles are up, i wouldn't run the risk of not having it done, it's just expensive to keep the TVR service history up!
Which is why I have, this very weekend, spent a day tending to the needs of my Chim biggrin

Most things are strighforward if a little awkward. Much easier if you have a decent size garage to work in which I now have (at last).
unfortunately i don't know one end of a spanner from the other! I just know how to drive it! Thats why it gets expensive for me. Maybe it's time to get skilled up
I was thinking about starting to offer to show people how to do the basics as a day course but the legalities and H&S issues are daft.
That would be a great idea because i don't think i would be alone in my lack of ability! I've forked out a large amount of money in the 9 months of ownership, and the money is now running out!

sparkesp

298 posts

226 months

Monday 13th April 2009
quotequote all
Sorry, but B*****ks to H&S.

I know one end of a spanner, not necessarilly the other end tho.

I would love to spend time with someone who knows about these cars, just so as I knew a bit more than I do now.

Just pass me the disclaimer!

When is the course?

Tyre_Tread

10,697 posts

247 months

Monday 13th April 2009
quotequote all
If someone did decide to show a select group of 'friends' around a Chim and how to do some of the work yourself then what sort of things would you like to know how to do?

Oil and filter change?
Brake pads & discs?
Distributer cap, leads and plugs?
Axle top up?
Gearbox oil change?

Any of the above and what else?



lesstatt

4,318 posts

221 months

Tuesday 14th April 2009
quotequote all
No i think that would about cover the basics without going too deep and putting people off

Tyre_Tread

10,697 posts

247 months

Thursday 16th April 2009
quotequote all
lesstatt said:
No i think that would about cover the basics without going too deep and putting people off
OK, had a think about this. If I said a max of 4 people at a time with the day split into 2 halves.

Morning
Basics: inc looking at a stripped down engine to explain regularly talked about parts that you may never have seen. e.g Pistons, Crankshaft, cam shaft, valves etc
Oil and filter change?
Distributer cap,
leads and plugs?
100amp fuse - how to check & replace

Afternoon:

stepper motor remove & clean
Brake pads & discs?
Axle top up?
Gearbox oil change?

Would anyone be interested in this if I said maybe £25 per half day inc bacon butties at lunch time and tea and coffee along the way.

Bear in mind this would be in my own (albeit large) garage with no fancy equipment
like car lifts but using the sort of equipment that you can buy relatively cheaply.

We could even get someone to do the work on their own car under supervision so that you get some hands on experience rather than just watching. There's nothing that builds confidence nore than actually doing the job yourself.

If there's an inkling of interest I'll open up a dedicated thread.

I'm based right in the middle of the country just where the M1 and M6 meet.

spend

12,581 posts

282 months

Thursday 16th April 2009
quotequote all
Not wishing to discourage your initiative, but aren't there reasonable local college courses on car maintenance for beginners/intermediates? I seem to recall several PH'ers waxing lyrical about courses in Workshop in the not too distant past..

Shabs

1,866 posts

237 months

Thursday 16th April 2009
quotequote all
Tyre_Tread said:
lesstatt said:
No i think that would about cover the basics without going too deep and putting people off
OK, had a think about this. If I said a max of 4 people at a time with the day split into 2 halves.

Morning
Basics: inc looking at a stripped down engine to explain regularly talked about parts that you may never have seen. e.g Pistons, Crankshaft, cam shaft, valves etc
Oil and filter change?
Distributer cap,
leads and plugs?
100amp fuse - how to check & replace

Afternoon:

stepper motor remove & clean
Brake pads & discs?
Axle top up?
Gearbox oil change?

Would anyone be interested in this if I said maybe £25 per half day inc bacon butties at lunch time and tea and coffee along the way.

Bear in mind this would be in my own (albeit large) garage with no fancy equipment
like car lifts but using the sort of equipment that you can buy relatively cheaply.

We could even get someone to do the work on their own car under supervision so that you get some hands on experience rather than just watching. There's nothing that builds confidence nore than actually doing the job yourself.

If there's an inkling of interest I'll open up a dedicated thread.

I'm based right in the middle of the country just where the M1 and M6 meet.
Include powersteering maintenance and an overview of the fuse box (i.e. which fuse does what) and I'll be there!

Tyre_Tread

10,697 posts

247 months

Thursday 16th April 2009
quotequote all
spend said:
Not wishing to discourage your initiative, but aren't there reasonable local college courses on car maintenance for beginners/intermediates? I seem to recall several PH'ers waxing lyrical about courses in Workshop in the not too distant past..
There are but they tend to be very general rather than model specific.

I was just wondering if it would be helpful. If not then I won't bother. Simples! (chirp)

BBR

110 posts

230 months

Thursday 16th April 2009
quotequote all
I would definitely be interested, and happy to sign disclaimer.

lesstatt

4,318 posts

221 months

Thursday 16th April 2009
quotequote all
Yup put me down for it please, happy to sign disclaimer

im

34,302 posts

248 months

Friday 17th April 2009
quotequote all
I've been thinking about getting more hands-on so this is a very interesting idea - dependent upon date/time (as I'm at the bottom of the country) I'd be interested to come along.

Could be a fun day - would you want us to bring some tools (socket set etc)?

Tyre_Tread

10,697 posts

247 months

Friday 17th April 2009
quotequote all
im said:
I've been thinking about getting more hands-on so this is a very interesting idea - dependent upon date/time (as I'm at the bottom of the country) I'd be interested to come along.

Could be a fun day - would you want us to bring some tools (socket set etc)?
depending upon interest levels I may run more than one.

Probably better not to bring tools otherwise we'll end up with thousands. I have a basic but extensive tool kit and would propose to use that.

If there is interest I can ask around at some local hostelries to source some cheap overnight accomodation.