Help fixing PAS!
Help fixing PAS!
Author
Discussion

Shabs

Original Poster:

1,866 posts

237 months

Sunday 12th April 2009
quotequote all
Hi All,

My PAS sounds like a dying sea lion and has gone really heavy. I have checked the reservoir and it is about half empty - to the extent that the little dipstick thing stays dry when I close the cap. I have checked the pipes under the PAS Pump and one appears cracked (about a 2.5 inch crack!). Please help with:

1) How much PAS fluid should be in the reservoir?
2) Where do I buy PAS fluid (prefer a shop, ordering on the net will mean that I miss next weeks hoon frown )
3) Is replacing the PAS hoses an easy DIY in the street type of job?
4) Where do I get the bits for it (hoses, connectors, etc)?
5) Is there anything special that I need to know about priming the pump after filling fluid or changing hoses?

Thanks and all advice greatly appreciated!

Shabs

HRG

72,863 posts

270 months

Sunday 12th April 2009
quotequote all
The solid or the flexible hoses? Should be able to get either from a local hydraulics supplier I would have thought, the solid one will require swaging and bending using the old one as a pattern. Fluid is Dexron III available from any local motor factors.

Shabs

Original Poster:

1,866 posts

237 months

Sunday 12th April 2009
quotequote all
Thanks HRG, should the fluid be filled up to the top?

HRG

72,863 posts

270 months

Sunday 12th April 2009
quotequote all
Nope, there are two steps on the dipstick, it should be between these. Not sure if they're measured with the dipstick resting or screwed in so I have it just above the lower mark with it resting on the threads. It's not overly critical, just make sure there's some room for expansion and enough to avoid cavitation.

Shabs

Original Poster:

1,866 posts

237 months

Sunday 12th April 2009
quotequote all
Cheers mate, time to get ordering parts biggrin

Simon Says

19,466 posts

252 months

Sunday 12th April 2009
quotequote all
Shabs said:
Hi All,

My PAS sounds like a dying sea lion and has gone really heavy. I have checked the reservoir and it is about half empty - to the extent that the little dipstick thing stays dry when I close the cap. I have checked the pipes under the PAS Pump and one appears cracked (about a 2.5 inch crack!). Please help with:

1) How much PAS fluid should be in the reservoir?
2) Where do I buy PAS fluid (prefer a shop, ordering on the net will mean that I miss next weeks hoon frown )
3) Is replacing the PAS hoses an easy DIY in the street type of job?
4) Where do I get the bits for it (hoses, connectors, etc)?
5) Is there anything special that I need to know about priming the pump after filling fluid or changing hoses?

Thanks and all advice greatly appreciated!

Shabs
Shabs,the hose with the split can you squeeze it together with your fingers? does it have a steel u bent pipe attached to it? if you can thats a low pressure hose that feeds the pump and you should be able to get that stuff easily enough,if its the the high pressure hose(firmer hose with metal unions at each end)is still available all the hoses you need on this page winkhttp://www.thetvrshop.com/TVR/Parts/Chimaera/a|.ht...

Shabs

Original Poster:

1,866 posts

237 months

Sunday 12th April 2009
quotequote all
After further inspection, the pipe in question is the TVR pipe:

http://www.clever-trevor.net/part/153/power-steeri...

Expensive bit of pipe that, but whatever, better replace it now than have it let go on me whilst driving. I am also taking the opportunity to replace the belt as it has a lot of cracks, everywhere yikes

I am hoping that this is the right PAS fluid:

http://www.opieoils.co.uk/p-889-motul-dexron-iii-f...

Cheers,

Shabs

Edit to add: Thanks Simon, that's the one!

Edited by Shabs on Sunday 12th April 15:35

Simon Says

19,466 posts

252 months

Sunday 12th April 2009
quotequote all
Shabs,believe me that's not expensive for a pas High Pressure hose if yours is leaking get it changed if that hose bursts while your driving along and the fluid sprays over your maincat there is a big chance you may have bigger problems eek not trying to scare you just a heads up smile you don't have too use Dex 111 you can use Dex11 but the 111 is the better quality fluid,Dex11 is available everywhere.

Shabs

Original Poster:

1,866 posts

237 months

Sunday 12th April 2009
quotequote all
Very good point mate! I have done a more detailed check and even though there is a 2.5 inch crack in the high pressure hose, it doesn't appear to be leaking (i.e. the HP hose is dry and gunk free). The low pressure hose from the reservoir to the pump appears to be leaking where there is that little metal U joint that is used to drain the reservoir and pump. None of these things look too tough to replace, I will probably just do them all for peace of mind.

Shabs

HRG

72,863 posts

270 months

Sunday 12th April 2009
quotequote all
Those U's always leak... Nothing to worry about biggrin

Shabs

Original Poster:

1,866 posts

237 months

Monday 13th April 2009
quotequote all
HRG, YHM re the wheels on your Griff!

Chimjunkie

2,879 posts

242 months

Monday 13th April 2009
quotequote all
HRG said:
Those U's always leak... Nothing to worry about biggrin
An occasional drip from here is not unusual. Just keep topping up.

Simon Says

19,466 posts

252 months

Monday 13th April 2009
quotequote all
They are Compomotives Shabs and i like em too biggrin the Griff they are attached to is rather nice as well,that picture dont do either justice whistle

HRG

72,863 posts

270 months

Monday 13th April 2009
quotequote all
Slightly better profile pic on there now, I'll put a better one up when I get home biggrin

Simon Says

19,466 posts

252 months

Tuesday 14th April 2009
quotequote all
HRG said:
Slightly better profile pic on there now, I'll put a better one up when I get home biggrin
Mmmm thats better lick

Chassis 33

6,194 posts

313 months

Tuesday 14th April 2009
quotequote all
Simon Says said:
Shabs,believe me that's not expensive for a pas High Pressure hose if yours is leaking get it changed if that hose bursts while your driving along and the fluid sprays over your maincat there is a big chance you may have bigger problems eek not trying to scare you just a heads up
Let me echo that, I had the serp belt go on the car once in qualifying, and didnt notice it had damaged the PAS return line, come the race lots of smoke after a couple of laps, pulled into the paddock and the engine bay was up in flames; thankfully i had a decent sized extinguisher to hand and the flames didnt damage too much.
Regards
Iain

Simon Says

19,466 posts

252 months

Tuesday 14th April 2009
quotequote all
Chassis 33 said:
Simon Says said:
Shabs,believe me that's not expensive for a pas High Pressure hose if yours is leaking get it changed if that hose bursts while your driving along and the fluid sprays over your maincat there is a big chance you may have bigger problems eek not trying to scare you just a heads up
Let me echo that, I had the serp belt go on the car once in qualifying, and didnt notice it had damaged the PAS return line, come the race lots of smoke after a couple of laps, pulled into the paddock and the engine bay was up in flames; thankfully i had a decent sized extinguisher to hand and the flames didnt damage too much.
Regards
Iain
Thought that may be a possibility hehe bearing in mind how close that exhaust is especially the main-cat yikes glad you caught it in time Chassis 33 bounce didn't want to scare the OPer unduly.