Chassis condition
Chassis condition
Author
Discussion

Whiplash

Original Poster:

301 posts

243 months

Monday 13th April 2009
quotequote all
What is the point that a chassis is kaput? I had my car jacked up today to try and locate a tapping noise and noticed the outriggers and the outside runners have surface rust on them.

I prodded it all with a screwdriver and its still strong but it looks nasty.

Does anyone have pictures of a good example and a really bad one?

Cheers


Edited by Whiplash on Monday 13th April 12:10

Colin RedGriff

2,541 posts

288 months

Monday 13th April 2009
quotequote all
I think as long as it's not holed then you are OK. If you have surface rust then it sounds like the poweder coat has been breached and you will need to do clean it up and reprotect it soon.

Mine had surface rust and the pwder coat was starting to lift so I stripped and repainted them over the winter. If you check out the Griffith forum there were several of us doing this over the winter with varying levels of rust.

My thread

Baretti's thread

Whiplash

Original Poster:

301 posts

243 months

Monday 13th April 2009
quotequote all
Baretti and Colin I bow before you both.

Thanks for the info. It looks like I will wax the Chassis for now but I found this on the Chimaera Pages.

As soon as I know the price I will strongly consider it.

http://www.chimaerapages.com/newchassis.php

MARKS6900

306 posts

233 months

Monday 13th April 2009
quotequote all
Hi, page 13 March issue of sprint £3995 for new chassis, better start saving.

Colin RedGriff

2,541 posts

288 months

Monday 13th April 2009
quotequote all
Also check out the replacement outriggers (and fitting service) they do. I think, if your outriggers are shot, then this is pretty good value for money.

V8 GRF

7,299 posts

241 months

Monday 13th April 2009
quotequote all
You don't need a new chassis if only the outriggers are shot.
These can be replaced with the body still in situ for a much more reasonable £1500 ish by either TrackvRoad or Speedmotive.