Loan distributor needed for testing
Loan distributor needed for testing
Author
Discussion

blitzracing

Original Poster:

6,422 posts

251 months

Monday 13th April 2009
quotequote all
Any of you helpfull people have a spare distributor floating around I can borrow for a while? I want to see if I can make the Maplin ignition amp work from the lucas magnetic trigger, and it would be a lot easier on the bench than on the car. For some reason I dont want to remove my distributor now the Sun is shining !!

Thanks

Mark


hiltonig

3,153 posts

239 months

Monday 13th April 2009
quotequote all
yep I have, pm me, although I wont be able to send it until next week, where are you ?

Barkychoc

7,848 posts

235 months

Monday 13th April 2009
quotequote all
They often go on ebay for peanuts.... http://cgi.ebay.co.uk/Rover-V8-Distributor_W0QQite...

Plus of course you won't need to pay any postage to return it!

Edited by Barkychoc on Monday 13th April 19:40

debaron

878 posts

228 months

Monday 13th April 2009
quotequote all

Hi Mark,

Yes I have my nice shiny new RPI one that currently isn't fitted to the car as you know!

It has no Vacuum Advance fitted and I've trimmed the wires from the trigger but it would make an ideal project dizzy and you're welcome to it for as long as you like!


PM me if interested.


Ryan



Teetertank

358 posts

218 months

Tuesday 14th April 2009
quotequote all
Anybody know if any Rover V8 distributor will fit our Chimaeras or are they TVR specific?

Or is it a case of any Rover dizzy will fit, but needs the weights setting up for individual car?

Chassis 33

6,194 posts

313 months

Tuesday 14th April 2009
quotequote all
They all will fit, with some work, the question revolves around what oil pump is fitted as to whether you need a male or female oil pump drive (the changeover was sometime in the 70's) or no oil pump drive at all ie an intermediate serpentine setup. To swap one to the other to drift out the roll pin at the bottom of the dizzy and swap the drive onto the one you want to use. All the serpentine dizzys I;ve seen have the facility to retrofit an oil pump drive.
You also have to change some of the electrical connections depending on whether you have an ignition amp integrated into the dizzy housing, or remote etc etc.

You also have to ask why would you want to go to an early setup, you could go to an early points dizzy but...

Regards
Iain

Teetertank

358 posts

218 months

Tuesday 14th April 2009
quotequote all
I have a serpentine engine, I don't wish to go to an older style system - just trying to find a replacement distributor, and working out what would fit and be compatible.

The dizzy fitted at present (and as standard) on my car has the remote ignition module mounted next to the coil.

Think I need 35DM8? But can't see the remote amp ones for sale.

So am wondering if it is usual to buy a dizzy with integral amp mount, but to remove the amp from the dizzy and fit remotely?