Engine cut out – immobiliser problem???
Discussion
Ok this is a really tricky one so as much help/ideas as possible would be greatly appreciated!
This problem must(?) be related to the previous problems that I’ve had as they have all resulted in the engine cutting out at one time or another, see:
(10 March) http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
(30 March) http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Now, I’ve replaced the ignition coil and ignition module (due to previous cut out when hot) but now the engine is cutting out at a different time…
After 45 mins driving exactly the engine just died (took same time to cut out before). Restarts straight away (after disabling the immobiliser) but then dies after 10 secs. I reckon it might be immobiliser related as when the engine dies the light on the immobiliser slot (next to ignition) flashes straight away.
I tested this theory by inserting the immobiliser fob in the hole whilst the engine was running and the engine died in exactly the same way.
Can this be an immobiliser problem as it doesn’t sound like fuel starvation (ie no coughs or splutters) but sounds like the spark is the first to go – can the immobiliser cut the spark or does it stop the fuel?
If people think that it is an immobiliser issue (as evidence seems to point to) I’m happy to bypass/short the immobiliser (don’t need it for my insurance). Any ideas of how I could do this would be very helpful. Where is the immobiliser box in the car and what would I need to do? Does the immobiliser get hot during use? – ie I don’t understand why it fails after 45 mins driving… Aaaaah!
Obviously I appreciate that immobiliser issues are rather sensitive due to security so if anyone has any ideas which they feel would be best not posted on an open forum please do send me a private message/email.
Is there anything else it could be? After running I opened the fuel tank filler and there was no hiss (as per normal) with 1/4 tank of fuel, I thought this was odd – could this be anything to do with the problem or a red herring?
Thank you in advance.
PS I’ve been told that Carl Baker is the man to talk to about immobiliser issues but he’s away on hols at the mo, will try to speak to him next week.
This problem must(?) be related to the previous problems that I’ve had as they have all resulted in the engine cutting out at one time or another, see:
(10 March) http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
(30 March) http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Now, I’ve replaced the ignition coil and ignition module (due to previous cut out when hot) but now the engine is cutting out at a different time…
After 45 mins driving exactly the engine just died (took same time to cut out before). Restarts straight away (after disabling the immobiliser) but then dies after 10 secs. I reckon it might be immobiliser related as when the engine dies the light on the immobiliser slot (next to ignition) flashes straight away.
I tested this theory by inserting the immobiliser fob in the hole whilst the engine was running and the engine died in exactly the same way.
Can this be an immobiliser problem as it doesn’t sound like fuel starvation (ie no coughs or splutters) but sounds like the spark is the first to go – can the immobiliser cut the spark or does it stop the fuel?
If people think that it is an immobiliser issue (as evidence seems to point to) I’m happy to bypass/short the immobiliser (don’t need it for my insurance). Any ideas of how I could do this would be very helpful. Where is the immobiliser box in the car and what would I need to do? Does the immobiliser get hot during use? – ie I don’t understand why it fails after 45 mins driving… Aaaaah!
Obviously I appreciate that immobiliser issues are rather sensitive due to security so if anyone has any ideas which they feel would be best not posted on an open forum please do send me a private message/email.
Is there anything else it could be? After running I opened the fuel tank filler and there was no hiss (as per normal) with 1/4 tank of fuel, I thought this was odd – could this be anything to do with the problem or a red herring?
Thank you in advance.
PS I’ve been told that Carl Baker is the man to talk to about immobiliser issues but he’s away on hols at the mo, will try to speak to him next week.
Hi, I had similar cutting out problems over the last 18months which I went through the whole gamut of solutions to try to fix without any joy before biting the bullet and replacing the alarm and immobiliser, and it's now running fine. Didn't have mine done by Carl Baker as he's a bit far away from me, but went through Sportmotive. Cost me just over £300.
This sounds like the exact problem i had with my 95 Chim 3 years ago...................for the first 6 months it was fine but soon after the engine would cut out without warning, when i was parked, doing 30 or 80 on the motorway a didn't matter. I ended up taking the car to V8 specialist in kendal (as the car cut out there) and it was a problem with the imob.................They replayed the origional TVR imob (which are crap) with a cat 1 costing around 300-350.............a very frustrating problem solved..............hopefully you will get sorted
I have a similar problem. My alarm system is the original Meta system from what I can tell.
On mine when the engine cuts out the immobiliser LED on the steering column next to the immobiliser reset slot starts flashing.
If I am quick enough I can press the keyfob and reset the immobiliser before the car stops and effectivly bump start it without doing anything else. So it looks definitely like an immobiliser problem.
I had a
moment when I was on the wrong side of the road making an overtake and the engine decided to die on me.
I bypassed the immobiliser with a relay and now when driving I still get the LED flashing when the fault occurs but because of the bypass relay the engine doesn't die.
I am away from home a lot at the moment so I don't get much time to try to sort it out. Also the problem is not so frequent that you can replicate it effectively to fault find it, but I am almost 100% sure it's the immobiliser.
The relay is wired such that when the car is stopped the immobiliser is still fully effective. So I am not in that much of a hurry to fix it now.
On mine when the engine cuts out the immobiliser LED on the steering column next to the immobiliser reset slot starts flashing.
If I am quick enough I can press the keyfob and reset the immobiliser before the car stops and effectivly bump start it without doing anything else. So it looks definitely like an immobiliser problem.
I had a
moment when I was on the wrong side of the road making an overtake and the engine decided to die on me. I bypassed the immobiliser with a relay and now when driving I still get the LED flashing when the fault occurs but because of the bypass relay the engine doesn't die.
I am away from home a lot at the moment so I don't get much time to try to sort it out. Also the problem is not so frequent that you can replicate it effectively to fault find it, but I am almost 100% sure it's the immobiliser.
The relay is wired such that when the car is stopped the immobiliser is still fully effective. So I am not in that much of a hurry to fix it now.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


